User's Manual

1-25
Connecting the LCD TV and Peripheral Devices
LCD TV Overview and Installation
Connecting to a PC
When used as a monitor, this LCD TV supports resolutions of 1600x1200 @ 60Hz (UXGA) /
1280x1024 @ 85Hz (SXGA). For best performance, please select 1280x768 @ 60Hz /
1360x768 @ 60Hz (WXGA).
Turn off your PC and LCD TV.
1
Turn on the PC power and verify the PC settings. (For best performance, please set the
resolution to 1280x768 @ 60Hz / 1360x768 @ 60Hz (WXGA).)
2
Connect a PC VGA or DVI cable between your PC and the ANALOG RGB or DVI-D of
the LCD TV. Then fasten the screws on both sides of the cable.
3
Connect a PC Audio Cable between the Sound Output Jack of the sound card on the
PC and the AV3 Composite of the LCD TV.
4
Connect a Power cable to the Power connector on the rear of your LCD TV.
5
Audio/Video cable (Optional)
TV
Check the video on the external TV and use the external TV remote control to select
the input mode. The same screen showing on the LCD TV will be displayed on the
external TV.
4
Power on the computer before turning on the LCD TV.
6