User's Manual

LCD TV Overview and Installation
Connecting to a PC
When used as a monitor, this LCD TV supports resolutions of 1600x1200 @ 60Hz (UXGA) /
1280x1024 @ 85Hz (SXGA). For best performance, please select 1280x768 @ 60Hz /
1360x768 @ 60Hz (WXGA).
Turn off your PC and LCD TV.
1
Turn on the PC power and verify the PC settings. (For best performance, please set the
resolution to 1280x768 @ 60Hz / 1360x768 @ 60Hz (WXGA).)
2
Connect a PC VGA or DVI cable between your PC and the ANALOG RGB or DVI-D of
the LCD TV. Then fasten the screws on both sides of the cable.
3
Connect a PC Audio Cable between the Sound Output Jack of the sound card on the
PC and the AV3 Composite of the LCD TV.
4
Connect a Power cable to the Power connector on the rear of your LCD TV.
5
Power on the computer before turning on the LCD TV.
6
Turn on the TV power and press the <PC> button on the remote control to select the PC
input mode.
7
1-26
Connecting the LCD TV and Peripheral Devices