User's Manual

Two channels can be shown on the TV screen simultaneously. Available screen
division methods are PIP (Picture in a Picture), POP (Picture on a Picture), and
PBP (Picture by a Picture).
PIP Function Settings
Press the <MENU> button on the remote control.
1
Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.
2
Press the < > button on the remote control to navigate to the ‘On/Off’ submenu.
Press the < > button on the remote control to select ‘PIP’. When configuration is
complete, press the <OK> button.
● Source : Select the external input source (Component, RGB, or DVI).
3
2-28
Configuring the PIP/POP/PBP Functions
N󳢯 O󳢯 T󳢯 E
▶▶
The PIP/POP/PBP modes are divided into two groups:
- Group A: Component, RGB, DVI
- Group B: TV, AV1, AV2, AV3
If Group A is selected for the main screen, it cannot be selected for the sub screen.
If Group B is selected for the main screen, it cannot be selected for the sub screen.
That is, the groups selected for the main and sub screen at any one time should be different from
each other.