User's Manual

Tr o u b l e s h o o t i n g
Please check the below particulars before you contact the service
center to notify an abnormality of the monitor.
Take these respective actionsCheck these points
Is the monitor power cord
inserted ?
Is the power turned off ?
Is the power turned on and
the power pilot lamp Blinking
Amber?
Is the message “ Out Of
R a n g e ” shown ?
Is the message “ No Input
S i g n a l ” s h o w n ?
Please connect the power cord
correctly to the concent.
Please press the power button.
The monitor is in the power sav-
ing mode. Please therefore
move the mouse, press any key
on the keyboard, or recheck
VGA Cable connection.
If a power indicating lamp of
amber color blinks, press any
key to go back to previous
mode. As it passes over the fre-
quency limit of horizon (31.5-80
kHz) and verticality (60-75 Hz)
in PC (video card), you'd recon-
figure it as referring to the speci-
fication of this manual. (If you
install the monitor driver that we
have provided, it won't come up
with the message “ OUT OF
R A N G E ” . )
It shows up as PC changes to
power-saving mode or the
signal cable between PC and
monitor isn't rightly connected.
Move your mouse or press key-
board button. But it won't still
show you a right screen, then
recheck a signal cable
c o n n e c t i o n .
Th is s y m p to m
c a n b e d is c o v e re d
Th e s cre e n d oe s n’ t
s h o w a n yt h in g .