User's Manual

ANALOG OSD (On Screen Display) Display
Selection and Control
•
B R I G H T N E S S
- It is used to adjust brightness of the screen.
•
C O N T R A S T
- It is used to adjust distinction.
•
P H A S E - It is used to adjust the phase of
the screen. Please use it in case there is
noises or lines are overlapped.
•
DOS MODE - It is to optimize TEXT and
GRAPHIC.
•
R GAIN - Modify the value of red.
•
G GAIN - Modify the value of green.
•
B GAIN - Modify the value of blue.
MISC ADJUST
DISPLAY ADJUST
De sc ript ions of OSD Adjustm e nt and Functions
•
CLOCK - Controlling the horizontal size in screen.
•
H- POSITION - It is used to move screen right-wards or left-wards.
•
V- POSITION - It is used to move screen up-wards or down-wards.
•
COLOR TEMPERATURE - configured to one of 9500, 8000,
6500(Default), and 5000.
- 9500 : selected to blue color hued screen.
- 5000 : selected to red color hued screen.
•
WHITE BALANCE - It automatically sets Color Balance.
(It will be adjusted to optimization after making background screen a white color.)
•
FACTORY DEFAULT (Manufactured Initial Value)
- It goes back to the initial value that has been
set as forwarding.
•
AUTO (Auto Set) - It is configured as the most
appropriate, optimized screen.