User's Manual

Troubleshooting. Please read before
notifying our repair officers of a failure
The screen is under a bias
toward one side, or is not
centrally positioned.
A faint letter is shown, or the
phase is out of focus. Noise
is also generated
horizontally.
These symptoms
can be discovered
Is the positional adjustment
made correctly?
Is the phase adjustment made
p r o p e r l y ?
Is the screen set in the best
state?
Selecting the SELECT button
automatically adjusts the screen
in the best state applicable to the
current mode.
If you are not satisfied with the
auto adjustment, you can directly
adjust the H Position (Horizontal
Position), V Position (Vertical
Position), and Clock (Horizontal
Size) of the OSD menus.
Selecting the SELECT button
automatically adjusts the screen
in to the optimal state applicable
to the current mode.
If you are not satisfied with the
auto adjustment, you may manu-
ally adjust the Phase (Focus) of
the OSD menus.
While you are using this product
in the mode of 1024X768 and
60Hz, the best condition of the
screen is available. In the mode
of VGA(640x480) or
SVGA(800x600), the outline of a
letter may be seen dimly or
u n e v e n l y .
Take these actionsCheck these points