N E OVIEW AL150 USER MANUA L 15.0" TFT LCD MONITOR [ FOR EXPORT ] LCD PC No.1 Company #1451-78, Seocho-Dong, Seocho-Gu,Seoul, 137-867, Korea TEL : 82-2-2190-5000 FAX : 82-2-2190-5009 http:// www.atech.co.kr Rev 1.
After openning the box, Please check to ensure that followering accessories are provided with the monitor VGA Signal Cable User Manual Power Cord DC Power Supply Unit Monitor Driver (Option) USB Cable The actual monitor and accessories may appear differently from those shown on the above figure
Agency Regulation Notice FCC / CE 1 Before Use Features 3 Instructions for Safety 4 How do I use the Monitor ? How do I Connect the Computer Cables ? 8 How do I Connect with the IBM computer ? The Name and Function of Each Individual Part 9 Front view Back view The name and function of each individual part in the screen adjusting block How to Select and Adjust the OSD (On Screen Display) 11 MENU ADJUST OSD ADJUST EXIT Information for Your Convenience Troubleshooting 15 Product Specification
FCC Compliance Statement CE Conformity Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. The Product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and carries the "CE" mark accordingly.
15.0" (38.016cm) LCD Panel Adopted - Adopted the 15.0" LCD (Liquid Crystal Display) Panel which allows you efficient use in a small space due to the slim design. - Matters that demand special attention are divided into 'Warning' and 'Caution' and are detailed a follows Warning A Dynamic Convenient Design -. The Embodyment of Wall-mounted Display. In case of the possibility that a serious injury or death may occur during a violation of the instructions.
Warning Please be careful to keep the panel from being scratched or damaged when you transport the monitor. Please insert the two pins of the plug completely so that the power supply unit can be connected tightly. The panel may be damaged, causing a failure. Unsafe power connections may cause a fire. Don't set up the equipment in a humid environment (such as bathroom, rainy or windy area, etc). Please stop using in case of smoke or abnormal odors.
Warning How do I connect the computer cables? How do I connect with the IBM computer ? You must switch the power off and pull the power cord out before moving the monitor. You should also check as to whether external connection cords - such as the connection cords between component parts - are all pulled out before the movement. A damaged cord may cause a fire or electric shock. Pull the power cord out when the monitor is not used for a long time, or while you are away.
The Name and Function of Each Individual Part The Name and Function of Each Individual Part The Name and Function of Each Individual Part in the Screen Adjusting Block Front View AUTO Function If you select the SELECT Power Pilot Lamp Lights up during the operation but goes out if you turn the power off. button before using the OSD menu, the screen is automatically adjusted to the optimal display state applicable to the current mode, while the following message appears.
How to Select and Adjust the OSD (On Screen Display) Screen Use the OSD adjustable buttons on the side of the monitor to set/adjust to the best screen and operating environment. How to Select and Adjust the OSD (On Screen Display) Descriptions of OSD adjustment and functions MENU ADJUST If you have to adjust the screen, please adhere to the following procedure. -. AUTO CONFIGURATION - It is configured as the most appropriate, optimized screen. -.
How to Select and Adjust the OSD (On Screen Display) How to Select and Adjust the OSD (On Screen Display) Descriptions of OSD Adjustment and Functions Descriptions of OSD Adjustment and Functions MENU ADJUST OSD ADJUST - . Preset - embody the best color. (the initial value of factory) - . Preset - choose the blue screen color. -. OFF TIMER -. OSD menu configures a disappearance time.
Troubleshooting Troubleshooting Please check the below particulars before you contact the service center to notify an abnormality of the monitor. Please check the below particulars before you contact the service center to notify an abnormality of the monitor. Check these points Take these respective actions Check these points Take these actions This symptom can Is the monitor power cord inserted ? Please connect the power cord correctly to the concent.
Troubleshooting Product Specification Please check the below particulars before you contact the service center to notify an abnormality of the monitor. The details of product specification can be changed without notice to improve the product. Check these points Is the positional adjustment made correctly? This symptom can be discovered The screen is under a bias toward one side, or is not Is the phase adjustment made properly? centrally positioned.
Product Specification ¸ð ´Ï ÅÍ ¸¦ »ç ¿ë ÇÏ ·Á ¸é Factory-specified Mode Factory-specified Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VGA MAC VESA VESA VESA VGA VESA VESA VESA VESA MAC VESA VESA VESA 640 x 350 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 Vertical Horizontal Frequency(kHz) Frequency(Hz) 31.47 35.00 31.47 37.86 37.50 31.47 35.16 37.88 48.68 46.88 49.73 48.36 56.48 60.
