User guide

AH Systems

PAM-2640

A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own

power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come

with a 15-volt DC regulated power source. A low voltage indicator confidently allows you to power the amplifier with

your own external 15-volt DC battery. This makes it a convenient choice for field measurements. See table below for

amplifier specifications.

Specifications

Amplifier Type

Low Noise Amplifier; Broadband Preamplifier

Applications

Mobile / Wireless Systems; EMC/EMI Testing

Primary Performance Specifications

Frequency Range

26000 to 40000 MHz

Minimum Gain

16.00 dB

Maximum Gain

22.00 dB

Gain Flatness

1.40 dB

Input VSWR

1.70 :1

Output VSWR

1.70 :1

Dynamic Range

Noise Figure

4.50 dB

Amplifier Package

Package Type

Connectorized

Connectors

2.9mm

Electrical Characteristics

Operating Voltage

15.00 volts

Operating Voltage

15.00 volts

Operating current

0.1800 amps

PAGE 1
AH Systems PAM-2640 A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-volt DC regulated power source. A low voltage indicator confidently allows you to power the amplifier with your own external 15-volt DC battery. This makes it a convenient choice for field measurements. See table below for amplifier specifications.