Agilent N8300A Wireless Networking Test Seet A Measurement Applications With N630XA The Agilent N630XA measurement applications add onebutton measurements and modulation analyysis capabilities to help with your design, evaluation, and maanufacturing test of WiMAX™ and WLAN (Wi-Fi) devices and modules. The Agilent N8300A wireless networking test set s is a onebox radio frequency (RF) parametric test set baased on an architecture that includes an integrated vector signal VSG).
Definitions and Conditions Specification Specifications describe the performance parameters covered by the product warranty and apply over 20 to 30 °C unless otherwise noted. Warranted specifications include measurement uncertainty calculated with a 95 percent confidence. Data represented in this document are specifications unless otherwise noted. Typical Represents characteristic performance, which 80 percent of the instruments manufactured will meet.
VSG performance Performance Sample rate Bandwidth Effective DAC resolution To 125 MSa/s 100 MHz 16 bits Frequency specifications Frequency range Frequency accuracy Internal time base reference oscillator aging rate Temperature effects Line voltage effects 250 kHz to 6.0 GHz; also refer to Application Software section ±aging rate; ±temperature effects; ±line voltage effects ≤ ±5.0 ppm/10 yrs, < ±1.0 ppm/yr ±1.0 ppm (0 to 50 °C) ±0.1 ppm (nominal), over line voltage range 5 to –10% (nominal) 0.
VSA performance (RFIO 1 to 4 specifications)1 Frequency specifications Frequency range Refer to Application Software section Amplitude specifications Input amplitude range Maximum safe input level Absolute power measurement accuracy frequency bands < 4.8 GHz frequency bands ≥ 4.8 GHz RFIO ports VSWR Residual error vector magnitude (EVM) Signal-to-noise ratio Isolation between RFIO ports +33 to -60 dBm; frequency bands < 4.8 GHz +33 to -50 dBm; frequency bands ≥ 4.8 GHz +36 dBm ±0.
Power requirements Power consumption < 270 W maximum Data storage External Supports USB 2.0-compatible memory devices Size and weight Dimensions (H x W x L) Weight 177 mm x 425 mm x 495 mm 7.0 in x 16.8 in x 19.5 in 18.
Inputs and Outputs Front panel RF In/Out Connector Type-N female, 50 Ω nominal RF output Connector Type-N female, 50 Ω nominal USB ports Master (2 ports) Standard Connector Output current Compatible with USB 2.0 USB Type-A female 0.5 A nominal Others (not used) Probe power Voltage/Current +15 Vdc, ±7% at 150 mA max nominal -12.
Rear panel (continued) SOURCE TRIG IN Accepts TTL and CMOS level signals for triggering point-to-point in sweep mode. Damage levels are ≤ –0.3 V and ≥ +5.3 V SOURCE TRIG OUT Outputs a TTL- and CMOS-compatible signal level for use with sweep mode. Input damage levels are ≤ –0.3 V and ≥ +5.
Application Software N6301A-1FP 802.16 OFDMA measurement application (Mobile WiMAX) N6301A-2FP 802.
N6301A key specifications (continued) Source performance Frequency specifications Frequency range 1.765 to 1.815 GHz; 2.15 to 2.71 GHz; 3.3 to 3.8 GHz (Options 505 and 506); 4.8 to 5.875 GHz (Option 506 only) Amplitude specifications for the RF Output port Output amplitude range1 Absolute amplitude accuracy Error vector magnitude (EVM)2 Spurious (non-harmonics) 1.765 to 1.815 GHz; 2.15 to 2.71 GHz; 3.3 to 3.8 GHz: +20 to –100 dBm (CW); 4.8 to 5.
Application Software N6302A-1FP - 802.11a,b,g,n WLAN measurement application, fixed perpetual license N6302A-2FP – 802.11b and g WLAN measurement application, fixed perpetual license The table below shows the key measurements covered by the N8300A and the N6302A WLAN measurement applications.
Analyzer performance Frequency specifications Frequency range Frequency resolution Measurement bandwidth Frequency accuracy Phase Noise Amplitude specifications Input amplitude range Absolute power measurement accuracy RF input VSWR Signal-to-Noise Ratio (SNR) Modulation specifications Residual error vector magnitude (EVM) 2.381 to 2.519 GHz (Options 505 and 506) 4.800 to 5.
Amplitude specifications for the RF Output port Output amplitude range1 Absolute amplitude accuracy Error vector magnitude (EVM) Spurious (non-harmonics) 2.402 to 2.484 GHz: +20 to -100 dBm (CW); 4.8 to 5.875 GHz: +13 to -100 dBm (CW); See EVM specification for information on modulated signals 2.402 to 2.484 GHz: ±0.9 dB (CW) (+7 to -90 dBm) ±0.5 dB (CW) typical (+7 to -90 dBm) 4.8 to 5.875 GHz: ±1.0 dB (CW) (+7 to -90 dBm) ±0.5 dB (CW) typical (+7 to -90 dBm) 802.11a,g,n: 2.
Related Literature Agilent N8300A Wireless Networking Test Set, brochure, literature number 5989-7063EN N6301A 802.
www.agilent.com www.agilent.com/find/n8300a For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus .
