User guide

14
Table 14. Test Port Input (Dynamic Accuracy specification
a
)
Accuracy of the test port input power reading is relative to the reference input power level. Applies to input ports 1 and 2 with the following
conditions: IF bandwidth = 10 Hz, and Environmental temperature 25° ±5 °C, with < 1 °C deviation from calibration temperature
300 kHz to 3 GHz 300 kHz to 3 GHz
300 kHz to 6 GHz 300 kHz to 6 GHz
300 kHz to 9 GHz 300 kHz to 9 GHz
a
Dynamic accuracy is verified with the following measurements:
• compression over frequency
• IF linearity at a single frequency of 1.195 GHz and a reference level of -20 dBm