Infiniium 8000 Series Oscilloscopes Superior Mixed-Signal Analysis with Next-Generation MegaZoom Deep Memory Data Sheet • 1 GHz and 600 MHz bandwidth models • MSO models with integrated 16 digital channels • 4 GSa/s sample rate • Up to 128 Mpts of industry-leading deep memory • Next-generation MegaZoom technology: • Fastest, most responsive deep memory • Highest-definition display with XGA resolution • Third-dimensional viewing with 256 color intensity grades • Extensive application software suite • Unriva
Infiniium Benefits Infiniium 8000 Series oscilloscopes Model Bandwidth Channels Sample rate Standard memory Maximum memory DSO8064A 600 MHz 4 4 GSa/s 1 Mpts 128 Mpts MSO8064A 600 MHz 4 + 16 4 GSa/s 1 Mpts 128 Mpts DSO8104A 1 GHz 4 4 GSa/s 1 Mpts 128 Mpts MSO8104A 1 GHz 4 + 16 4 GSa/s 1 Mpts 128 Mpts Dramatically speed debug time with mixed signal oscilloscope (MSO) models that integrate 16 digital channels 2 As embedded designs continue to increase in complexity with integra
Infiniium Benefits (continued) MSO viewing and triggering MSO application No matter how complicated the signals you are dealing with, the Infiniium MSO comes with powerful viewing and triggering capabilities to help you untangle them. The Infiniium MSO can trigger across all 16 digital channels and four scope channels. There are no limitations on the combination of analog and digital channels that can be used for a particular pattern or state trigger setting.
Infiniium Benefits (continued) Up to 128 Mpts industry-leading deep memory with fast digital, serial buses, and RF communication. Sample rate and memory depth go hand-in-hand. Deep memory in oscilloscopes sustains a high sample rate over longer time spans. With up to 128 Mpts of acquisition memory, the Infiniium 8000 Series offers superior resolution when capturing long, complex waveforms.
Infiniium Benefits (continued) MegaZoom technology enables ultra-fast waveform update rates Responsiveness and waveform update rate slow down dramatically on traditional deep memory oscilloscopes when they capture longer memory records, making them difficult and frustrating to use. The Infiniium 8000 Series oscilloscopes feature patented MegaZoom technology that provides the fastest waveform update rates, even when using the deepest memory records up to 128 Mpts.
Infiniium: “It’s like someone who sits down and actually uses a scope designed this one.” Steve Montgomery Director of Engineering, Linx Technologies Drag-and-drop measurements from the measurement bar provide an intuitive way to make a measurement on a particular cycle of your waveform. Up to 128 Mpts of industry-leading deep memory sustains maximum sample rates for the longest time captures.
Next-generation MegaZoom technology enables you to quickly pan and zoom through the deepest waveforms for detailed analysis. Award-winning ease-of-use can be seen from Infiniium’s simple analog-like front panel controls, color-coded to correspond to displayed waveforms. USB 2.0 port directly on front panel makes it easy to save files to a USB mass storage device. Hands-free operation is available with Infiniium’s VoiceControl option.
Infiniium Features Segmented memory acquisition mode Are you trying to capture communications or radar signals that are bursting in nature? The new segment memory acquisition mode allows you to capture the short bursts at maximum sample rate while not consuming memory during the periods of inactivity. Both analog and digital signals can be captured. Simple zooming Zooming with Infiniium’s graphical user interface is simple and convenient.
Infiniium Features (continued) AutoMask and mask test Mask testing is simplified with AutoMask. Acquire a waveform, define tolerance limits, and create a test envelope. Mask testing provides a pass/fail comparison of an incoming signal to the test envelope. Easily test your design’s conformance to industry standards with the Communication Mask Test Kit option. Advanced triggering Advanced triggers are essential when investigating known problems.
Infiniium Features (continued) E-mail on trigger Infiniium can automatically send an e-mail with a screen image of the display when the scope triggers. You can have your Infiniium send an e-mail to you or a message to your cell phone then control your scope from any Java-enabled web browser with Infiniium’s web-enabled feature.
Infiniium Advanced Application Software FPGA dynamic probe for Infiniium MSO (N5397A) The N5397A FPGA dynamic probe for Infiniium MSOs provides the most effective solution for validating and debugging embedded designs incorporating Xilinx FPGAs.
Infiniium Advanced Application Software (continued) High-speed serial data analysis software (option 003 or N5384A) The N5384A high-speed serial data analysis (SDA) software provides an effective way to validate signal integrity for designs employing high-speed serial interfaces with embedded clocks.
Infiniium Advanced Application Software (continued) Ethernet performance validation and compliance software (N5392A) The N5392A Ethernet electrical performance validation and compliance option provides you with a fast and easy way to verify and debug your 1000Base-T, 100Base-TX and 10Base-T Ethernet designs. The Ethernet electrical test software, allows you to automatically execute Ethernet physical-layer (PHY) electrical tests, and it displays the results in a flexible report format.
Infiniium Advanced Application Software (continued) My Infiniium Integration Package (option 006 or E2699A) The E2699A My Infiniium Integration Package option allows you to extend the power of your Infiniium oscilloscope by letting you launch your application directly from the oscilloscope’s front panel or graphical user interface.
Infiniium Advanced Application Software (continued) Logic analyzer/oscilloscope time correlation (E5850A optional) With version 3.30 of logic analyzer operating system software, you can easily make time correlated measurements between an Agilent 16900 Series logic analysis system or Agilent 1680/90 Series benchtop logic analyzer and an Infiniium oscilloscope without a correlation fixture. All that is needed are a cross-over LAN cable and two BNC cables.
Infiniium Active Probing Active probes Probing high-frequency signals becomes more challenging as the variety of test points and the frequencies of the signals continue to grow. Probes need to be lightweight, small, affordable, and offer the accessories and probe tips you require to get your job done easily. For high-speed differential signal measurements, the 1130A InfiniiMax differential probe amp, with its variety of probe heads, is a perfect compliment to the Infiniium 8000 Series oscilloscopes.
Infiniium Performance Characteristics Vertical: scope channels DSO8064A, MSO8064A, DSO8104A, MSO8104A Input channels DSO8064A/DSO8104A: 4 analog MSO8064A/MSO8104A: 4 analog + 16 digital Analog bandwidth @ 50 Ω (–3 dB)* DSO8064A/MSO8064A: DSO8104A/MSO8104A: DSO8064A/MSO8064A: DSO8104A/MSO8104A: Calculated rise time1 @ 50 Ω 600 MHz 1 GHz 583 ps 350 ps Input impedance* 1 MΩ ± 1% (13 pF typical), 50 Ω ± 1.
Infiniium Performance Characteristics (continued) Vertical: digital channels MSO8064A, MSO8104A Number of channels 16 Digital – labeled D15 – D0 Threshold groupings Pod 1: D7 – D0 Pod 2: D15 – D8 Threshold selections TTL, 5.0V CMOS, 3.3V CMOS, 2.5V CMOS, ECL, PECL, user defined User-defined threshold range ±8.
Infiniium Performance Characteristics (continued) Acquisition: scope channels DSO8064A, MSO8064A, DSO8104A, MSO8104A Real time sample rate (max) 2 channels Each channel 4 GSa/s 2 GSa/s Equivalent time sample rate (max) 250 GSa/s Memory depth Standard Option 040 Option 080 Option 160 Option 320 Option 640 2 channels/each channel 1 M / 500 K 8M/4M 16 M / 8 M 32 M / 16 M 64 M / 32 M 128 M / 64 M Sampling modes Real time Normal Peak detect High resolution Equivalent time Segmented memory Averaging Fil
Infiniium Performance Characteristics (continued) Trigger: scope channels Sensitivity Internal6 Auxiliary Level range Internal Auxiliary DSO8064A, MSO8064A, DSO8104A, MSO8104A DC to 600 MHz: 0.6 div 600 MHz to 1 GHz: 1.
Infiniium Performance Characteristics (continued) Trigger: digital channels MSO8064A, MSO8104A Threshold range (user defined) ±8.0 V in 10 mV increments Threshold accuracy* ±(100 mV + 3% of threshold setting) Predefined thresholds TTL=1.4 V, 5.0 V CMOS=2.5 V, 3.3 V CMOS=1.65 V, 2.5 V CMOS=1.25 V, ECL=–1.3 V, PECL=3.
Infiniium Performance Characteristics (continued) Display, computer system and peripherals, I/O ports DSO8064A, MSO8064A, DSO8104A, MSO8104A Display Resolution Annotation Waveform styles 8.
Infiniium Performance Characteristics (continued) General characteristics DSO8064A, MSO8064A, DSO8104A, MSO8104A Temperature Operating Non-operating 0°C to + 50°C –40°C to + 70°C Humidity Operating Non-operating Up to 95% relative humidity (non-condensing) at +40°C Up to 90% relative humidity at +65°C Altitude Operating Non-operating Up to 4,600 meters (15,000 feet) Up to 15,300 meters (50,000 feet) Vibration Operating Non-operating Random vibration 5-500 Hz, 10 minutes per axis, 0.
Infiniium Ordering Information Infiniium 8000 Series oscilloscopes Model Bandwidth Channels Sample rate Standard memory Maximum memory DSO8064A 600 MHz 4 4 GSa/s 1 Mpts 128 Mpts MSO8064A 600 MHz 4 + 16 4 GSa/s 1 Mpts 128 Mpts DSO8104A 1 GHz 4 4 GSa/s 1 Mpts 128 Mpts MSO8104A 1 GHz 4 + 16 4 GSa/s 1 Mpts 128 Mpts All models include: optical USB mouse, condensed keyboard, stylus, User's Quick Start Guide, built-in information system (also contains Service Guide and Programmer’s G
Infiniium Ordering Information (continued) MegaZoom deep memory options on new units Options Description 040 8 Mpts on 2 channels, 4 Mpts on each channel 080 16 Mpts on 2 channels, 8 Mpts on each channel 160 32 Mpts on 2 channels, 16 Mpts on each channel 320 64 Mpts on 2 channels, 32 Mpts on each channel 640 128 Mpts on 2 channels, 64 Mpts on each channel MegaZoom deep memory options after-purchase Options Description N5407A-040 8 Mpts on 2 channels, 4 Mpts on each acquisition channel N5407
Infiniium Ordering Information (continued) Probe options Options Description 54826-68701 MSO logic probe kit (One comes standard with the MSO8064A and MSO8104A models) 10070C 1:1, 1 MΩ passive probe 10072C Fine-pitch probe kit for 10070 Series passive probes 10073C 10:1, 2.2 MΩ passive probe (four come standard with all models) 10075A 0.
Infiniium Ordering Information (continued) Advanced application software options (user installed) Options Description FPGA Debug N5397A FPGA dynamic probe for Infiniium mixed signal oscilloscopes (option 001 for oscilloscope-locked license, option 002 for PC-locked license) Analysis N5391A Low-speed serial data analysis software for I2C and SPI N5402A CAN serial data analysis software N5384A High-speed serial data analysis software with clock recovery 89601A Vector signal analysis software (requ
Infiniium Ordering Information (continued) Hardware accessory options Options Description 1184A Testmobile with keyboard/mouse tray and drawer for accessories E2609B Rackmount kit E5850A Time-correlation fixture for logic analyzer and oscilloscope precision deskew* * Not required for correlation, only needed for the most precise deskew between oscilloscope and logic analyzer.
www.agilent.com Agilent Technologies’ Test and Measurement Support, Services, and Assistance Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully.
