User's Manual

T r o u b l e s h o o t in g

6 9

I connected an external monitor, but why are the monitor screens

overlapping and unstable?

F L AT O P′s TFT LCD uses 1024 x 768 resolution. This resolution is

applied to the external monitor. Therefore the screen could be distorted

or tremble. Adjust the external monitor′s resolution according to the

following procedure.

1. Refer to the monitor′s User Manual and check the supported

r e s o l u t i o n s .

2. Select Di s p l a y from the Control Panel.

3. Select Settings tap in the Display Properties.

4. Set the resolution that the monitor supports and click Ye s

If the above procedure doesn′t solve the problem, check that the

F L ATOP video driver is correctly configured in the Display Properties

I reinstalled Windows 98. Why do the sound, VGA, and LAN cards

m a l f u n c t i o n ?

To use FLATO P ′s sound, VGA, and LAN cards after reinstallation, install

all the drivers provided by the manufacturer again. You can download

those drivers from FLATO P ′s website at www. f l a t o p . c o . k r.

※ Please refer to ″Installing drivers″ on Page 18