Owner's manual

7
Package descriptions
209OSP-P1
Mainframe, DC Measurements, TDR Measurements,
Repeater Adapter
209OSP-P2
Mainframe, DC Measurements, TDR Measurements,
HDSL/ISDN/DDS Measurements, Repeater Adapter
209OSP-P3
Mainframe, DC Measurements, TDR Measurements,
Channel Monitor, Advanced Stress Patterns,
Enhanced ESF, Smart Loopback/Command Codes,
FT1, Repeater Adapter
209OSP-P4
Mainframe, DC Measurements, TDR Measurements,
Channel Monitor, Advanced Stress Patterns,
Enhanced ESF, Smart Loopback/Command Codes,
FT1, HDSL/ISDN/DDS Measurements, Repeater
Adapter
Ordering information
Mainframe
209OSP T-BERD T-Carrier Analyzer
Options
209OSP-1 DC Measurements
209OSP-2 TDR Measurements
209OSP-3 Channel Monitor
209OSP-4 Advanced Stress patterns
209OSP-5 Enhanced ESF
209OSP-6 Smart Loopback/Command Codes
209OSP-7 Fractional T1
209OSP-8 HDSL/ISDN/DDS Measurements
209OSP-96 DLC/DS0 Analyzer Lid
Upgrades
209OSP-UPG1 Cable Qualification
209OSP-UPG2 Advanced Services/Intelligent
Network Support
209OSP-UPG3 HDSL/ISDN/DDS Measurements
209OSP-UPG4 HDSL/Advanced Services/
Intelligent Network Support
Accessories
41084 T-BERD Repeater Power Supply
43141
T-BERD Repeater Power Supply Multiplexer
44116 T-BERD HDSL Doubler Power Supply
44527 T-BERD HDSL Remote Access Shelf
41754 T-BERD Repeater Adapter
41157 T-BERD Repeater Extender
PR-40A Thermal Graphics Printer with
Carrying Case
10966 Thermal Printer Paper
CC-42215 Soft Carrying Case for Outside
Plant Tester
CC-42632 Soft Carrying Case for Repeater
Power Supply
CC-OSPLID Soft Carrying Case for Outside
Plant Tester Lid
Technical specifications
Mainframe specifications
Operating modes
Self Test
Automatic Configuration
T1 Unframed
T1 D4
T1 ESF
T1 SLC Framed
T1 DID Framed
FT1 D4 Framed*
FT1 ESF Framed*
T1 Test Loopback
T1 Line Loopback
Repeater Test*
DC Measurements*
TDR Measurements*
HDSL Measurements*
SMARTNIU Measurements*
Patterns
All Ones
1:1
1:7
2 in 8
3 in 24
63*
511*
2047*
T1 QRSS
BRIDGTAP
MULTIPAT
Programmable (3 to 24 bits) (3)
All Zeroes
404, 1004, 2804, 2713 Hz*
T1-Daly
T1-2/96*
T1-3/54*
T1-4/120*
T1-5/53*
55 Octet*
MIN/MAX*
Input and output connectors
WECO 310, T1 Repeater Port,
8 pin RS-232, RJ48
Input impedance
BRIDGE 1000 W with ALBO
TERM 100 W with ALBO
DSX-MON 100 W with AGC
Receive level
BRIDGE or TERM +6 to –35 dBdsx
DSX-MON +6 to –24 dBdsx
Level measurement
+6.0 to –40.0 dBdsx,
+6.0 to –6.0: 0.1 dB resolution
–6.0 to –40.0: 0.5 db resolution
Frequency measurement
1 Hz resolution; 5 ppm accuracy
Transmit timing sources
Internal Clock
Recovered Clock
Line codes
AMI, B8Zs
Loopback codes
CSU
CSU Line (ESF)
CSU Payload (ESF)
NIU (FAC1, FAC2, FAC3)
NIU Network (ESF)
Programmable (3 to 8 bit)
Intelligent Repeaters*
HDSL End-Equipment*
DC measurements*
Resistance 10 W to 10 MW
Volts DC 0.5 to 400 VDC
Simplex Current 0 to 200 mA
TDR measurements*
Pulse Amplitude 10.0 V p-p
Measurement Range 50 to 10,500 ft
HDSL measurements*
Loop Loss 0.0 dB to 40.0 dB
Accuracy ±0.5 dB
Resolution 0.1 dB
Loop Length 100 to 20,000 ft
Capacitance 1500 pF to 323,500 pF
Power -40.0 to +13.0 dBm
Power
AC Operating and Charging Power
115 VAC ±10%, 50-60 Hz
Battery Type Lead Acid
Battery Operation 5 hours (nominal)
Battery Charging Time 8 hours (nominal)
Physical characteristics
Enclosure Dimensions (h x w x d)
7.0 x 13.6 x 7.8 in
(17.8 x 34.5 x 19.8 cm)
Weight 1.4 lb (5.6 kg)
Operational characteristics
Battery Operating Temperature. –20 to 50ºC
AC Operating Temperature –20 to 40ºC
Storage Temperature –20 to 60ºC
DLC/DS0 Specifications
*Optional