Specifications

NOTE: The back to back display configuration shown
(below left) can only be used inconjunction with the
Bolt Through mounting option.
The range of movement shown here applies to both
arms of Visidec Focus Articulated Arm Double.
934mm
(360.75”)
90mm
(3
9
/
16
”)
D The FlexiStar™ mechanism
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 20.05.11©
195mm
(7.68”)
54mm
(2.5”)
39mm
(1.5”)
150mm
(5.91”)
467mm
(18.39”)
68mm
(2.68”)
440mm (17.32”)
(450mm (17.75”)
when using Desk Clamp)
C Overall Dimensions
100mm
75mm
75mm
VESA Mounting Plate
in 75mm x 75mm
position
VESA Mounting Plate
in 100mm x 100mm position
100mm
E Min/Max Display Distance
Max.
NOTE:
The Visidec Focus Articulated Arm Double
can be configured so that the displays are
positioned side by side.
The maximum distance from the pole to the
back of the display will be determined by
the size of the displays.
Max.
F Desk Mounting Options
Desk Clamp
Desk Clamp suits desktop thicknesses of 12mm - 38mm (0.5”-1.5”)
39mm
(1.5”)
38mm (1.5”)
65mm
(2.56”)
75mm
(3”)
52mm
(2.05”)
Bolt Through
Bolt Through suits desktop thicknesses of
12mm - 40mm (0.5” - 1.5”)
52mm
(2.05”)
12mm (0.5”)
DESK
90mm
(3.54”)
Min.
Max. width
780mm (30.71”)
When positioning displays side-by-side (above)
the maximum display width is 780mm (30.71”)
Maximum distance
to centre of display
440mm (17.32”)