User Guide

Component Checklist
Bits Bag
Mounting Screws
Installation Instructions
TH-2250-VF
Mounting the Wall Plate
A
Flat Screen Wall Mount | Fixed
TM
Display Plate
Wall Plate
Coach
Screw (x4)
Masonry Wall
Plug (x4)
Large
Washer (x4)
Spacer
Bush (x6)
M6x12mm & M6x20mm
Phillips Head Screw
(x6 each)
Important Notes
TOOLS REQUIRED:

Power Drill

10mm or 6mm Drill Bit

Phillips Head Screw Driver

Spirit Level

Socket Wrench or Shifter

The Telehook 2250 Wall Mount supports Flat Panel Displays from 20” (50cm) to 37” (94cm)
and supports a maximum load of 50kgs (110lbs).

This product only supports VESA compliant displays with 100mm x 100mm (4”x4”), 100mm x 200mm (4”x8”)
and 200mm x 200mm (8”x8”) mounting hole patterns.

The manufacturer does not accept responsibility for incorrect installation.
Dry Wall
Anchor (x4)
M5x12mm & M5x20mm
Phillips Head Screw
(x6 each)
M4x12mm & M4x20mm
Phillips Head Screw
(x6 each)
Masonry Wall
Timber Stud Wall Dry Wall
TIP: Use a spirit level to ensure the
wall plate is horizontal
TIP: Use a spirit level to ensure the
wall plate is horizontal
TIP: Use a spirit level to ensure the
wall plate is horizontal
Washer
Masonry
Wall Plug
Wall Plate
10mm (
3
/
8
”)
Hole
Coach Screw
Note: Ensure the Wall Plate is
mounted with the arrow cut out
pointing upwards.
Wall
Plate
Coach Screw
Washer
6mm (
1
/
4
”)
Hole
Timber
Stud
Wall Plate
10mm (
3
/
8
”)
Hole
Dry Wall
Anchor
Dry Wall
Anchor Screw
Dry Wall
Anchor Washer
Note: Ensure the Wall
Plate is mounted with
the arrow cut out
pointing upwards.
Use a stud finder to accurately
locate the centre of the stud.
Ensure that all four screws fix
securely into the stud
Note: Ensure the Wall Plate is
mounted with the arrow cut out
pointing upwards.