user manual

U.S. Patent Number D548,382

ATD-80236 Instructions

Features and Specifications

• 7.4V 2000MAh Li-ion rechargeable battery - twice the life expectancy compared to regular rechargeable

batteries.

• Cordless, 60 super bright LED’s provide long, dependable service life.

• Shatterproof and shock resistant protective tube.

• Swivel hooks make this light easy to attach anywhere – horizontally or vertically..

• The ATD-80236 Saber Li-Ion Worklight provides an average runtime of 5.5 hours per charge.

• 9V 500mA AC to DC adaptor can be used with 110V AC power source.

• OPTIONAL DC adapter (ATD-80131) can be used with your vehicles 12V power outlet.

• Red light on adaptor (indicates charging), green light on adaptor (indicates fully charged), blue light on led

board (indicates low battery).

• Overcharge and over discharge protection.

• Automatically shuts off soon after low battery indicator lights up.

PAGE 1
ATD-80236 Instructions Features and Specifications • 7.4V 2000MAh Li-ion rechargeable battery - twice the life expectancy compared to regular rechargeable batteries. • Cordless, 60 super bright LED’s provide long, dependable service life. • Shatterproof and shock resistant protective tube. • Swivel hooks make this light easy to attach anywhere – horizontally or vertically.. • The ATD-80236 Saber Li-Ion Worklight provides an average runtime of 5.5 hours per charge.
PAGE 2
Charging Instructions The battery is only charged 50% before shipping. Fully charge your ATD Saber Worklight before use. Be sure your ATD Saber Li-Ion Worklight is turned off, as it will not charge while in use, and then plug the AC charging unit into the wall and into the bottom of your ATD Saber Li-Ion Worklight. The LED indicator on the wall charging unit will change from red to green when the ATD Saber Li-Ion Worklight is fully charged.
PAGE 3
The ATD Saber Li-Ion Worklight is NOT waterproof, and is NOT intended to be used in showers, saunas, or any other potentially wet locations. Keep the ATD Saber Li-Ion Worklight away from sinks, tubs, showers, etc. Retrieving ANY electrical appliance when they fall onto the water can be fatal. The ATD Saber Li-Ion Worklight is to be used for general indoor lighting. It is NOT intended to be used on potentially hazardous locations such as near flammables or in explosive atmospheres.
PAGE 4
U.S.