Motorcycle/ATV Lift Operating Instruction & Parts Manual Model Number Atd-7460 Capacity 1500 Lbs For Customer Service Contact Atd Tools Inc. 114 I-70 Trade Center Drive St.
! SAVE THESE INSTRUCTIONS ! For your safety please read, understand and follow the information contained within before use. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use. Instructions and safety information shall be conveyed in the operators native language before use is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
! ASSEMBLY ! 1. Install hydraulic unit into receiver and secure with provided 7.5mm X 22mm bolt. 2. Install lift foot pedal into sleeve. 3. Install handle into frame and secure using the provided pins(2). 4. Ensure assembly rolls freely, lifts, locks, and lowers easily. Get to know how the release pedal, lift pedal, and the height locking and unlocking mechanism work prior to loading the Lift.
CARE AND MAINTENENCE ! ! NOTE: When lift is not in use, lifting arm should be stored in the fully retracted position. Keep lift clean and well lubricated. Apply a couple of drops of light machine to all pivoting joints as needed. Thoroughly wipe up excess oil to help prevent slipping and falling. ! TO CHECK AND ADD HYDRAULIC OIL ! 1. To check hydraulic oil level, remove unit from lift, stand unit upright on a stable, level surface. Remove oil filler plug.
TROUBLESHOOTING Possible Causes Symptom Corrective Action Release valve not tightly closed Ensure release valve tightly closed Remedy overload condition Overload condition Hydraulic unit will not lift load Hydraulic unit bleeds off after lift Release valve not tightly closed Overload condition Hydraulic unit malfunction Ensure release valve tightly closed Remedy overload condition Contact Atd Tools Tech.
Atd Tools Inc. 114 I-70 Trade Center Drive St.
ATD TOOLS, INC. PRODUCT SPECIFICATIONS MODEL #: ATD7460 DESCRIPTION: HEAVY DUTY HYDRAULIC MOTORCYCLE LIFT CAPACITY: 1500 LBS PRODUCT DIMENSION: SADDLE MIN. HEIGHT: SADDLE MAX. HEIGHT: 34-7/8” (L) X 17-1/2 (W) 4-1/2” 16-1/2” NET WEIGHT: GROSS WEIGHT: CARTON DIMENSION: CUFT.: 86.0 LBS 92.0 LBS 36-7/8" X 17-7/8" X 7" 2.
