User's Manual

1. To remove damaged or rounded lugnut/lugbolt, simply place the twist socket lugnut remover over the fastener and turn with a 1/2" drive
impact, breaker bar or other related tool.
NOTE: Use EXTRACTOR PUNCH or Vice Grips to remove the damaged fastener out of the twist socket lugnut remover.
1. Tap lock over hubcap lock
2. Remove lock with 3/4" socket
NOTE: DO NOT USE IMPACT GUN WITH THIS TOOL
1. To remove GM Spline style hubcap locks, use side (b).
2. Rotate dual nipple studs around sprocket teeth until the two studs slide and lock onto hubcap lock. Remove hubcap lock with 3/4" wrench.
CAUTION: DO NOT USE AN IMPACT GUN OR EXCEED 20FT LBS OF TORQUE WHEN USING THIS TOOL
3. To remove GM triangle drive hubcap locks, use the 3/4" hex side (a)
4. Insert hex nut side (a) into triangle well of hubcap lock. Rotate lock off with a 3/4" wrench.
1. Tap cylinder over hubcap lock.
2. Remove lock with a 3/4" socket.
NOTE: Most pre-1983 Chrysler hubcap locks can be removed with the GM hubcap lock remover.
1. Tap cylinder over hubcap lock.
2. Remove lock with a 3/4" socket.
NOTE: Use extractor punch to knock the lock out of the cylinder.