ATD-8031 3/8” Air Hose Reel INSTRUCTION MANUAL
INTRODUCTION Thank you for purchasing your ATD-8031 3/8” Air hose reel. This hose reel is a breakthrough in industrial quality hose reel design, performance, durability, versatility and cost. The efficiency, safety and convenience benefits of auto rewind hose reels are now available for most situations where a hose is required. Manufactured from the highest quality weather resistant materials, the tough high – impact polypropylene is U.V. stabilized, designed for all purpose corrosion-free durability.
INSTALLATION a) Attach the carry handle to the reel casing above the reel/hose mouth, using the screws provided. b) The reel can be mounted in any position. The most common mounting positions are shown below. (Refer Fig 1,2,3,4) If you choose the most popular positions (1) and (2) you should use the standard (8031-17) bracket. If using positions (3) and (4) you will need the optional bracket (8031-16). c) Fix mounting bracket in required location and position reel onto bracket.
SPRING TENSION AND LATCH SIDE PLATE REMOVAL a) Place reel on a clean bench with latching plate (9) face up. b) Release spring tension by opening tension plate (8) and place handle of a pair of pliers in the exposed slots. Grip the pliers firmly and remove the two screws holding the tension plate (8) and carefully allow the tension plate to slowly unwind counter-clockwise. c) Remove screw holding tension plate and remove tension plate. Remove screw located at the edge of the latching plate.
TROUBLE SHOOTING GUIDE
