User's Manual

Battery Charge Indicator
The screwdriver is equipped with a battery charge
indicator (3) to assist you to determine how charged
your screwdriver may currently be.
To check how much charge your screwdriver may
have simply press the button below the battery charge
indicator (3) and the LED lights will illuminate.
A red Led informs you that the screwdriver requires
charging, an orange Led indicates that the screwdriver is low in charge
andquires charging.
A green LED indicates that the screwdriver is fully charged and ready
for use.
LED Light
The screwdriver has a built in LED light (10) to
illuminate dark areas. Simply press the LED light
On/Off button (9) on and off as required. Turn
off the LED light when not needed to save battery life
by pressing the LED light On/Off button (9) again.
This will turn off the LED light (10).
Maintenance
• Keep the ventilation vents of the tool clean at all times, if possible,
prevent foreign matter from entering the vents.
• After each use, blow air through the tool housing to ensure it is free from
all dust particles which may build up. Build up of dust particles may
cause the tool to overheat and fail.
• If the enclosure of the tool requires cleaning do not use solvents but a
moist soft cloth only. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
Note: ATD Tool will not be responsible for any damage or injuries
caused by the repair of the tool by an unauthorised person or by
mishandling of the tool.
Operation (cont.)
Caring For The Environment
Power tools that are no longer usable should not be
disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and
raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council
authority for recycling advice.
Description of Symbols
Contents
1 x Cordless Screwdriver
1 x Charger
1 x 2 1/4 Bits Holder
28 x 1 CRV Bits
6 x 2 CRV Bits
1 x Instruction manual
V
~
mA
A
dc
Hz
W
no
/min
Volts
Alternating current
Milliamperes
Amperes
Direct current
Herts
Watts
No load speed
Revolutions or reciprocation per minute
Double insulated
Warning
Isolation transformer
Indoor use only
Polarity
,,
,,
,,