ATD-500 500W Portable Quartz Halogen Flood Work Light Manufactured in China to ATD Tools, Inc.
READ ALL INSTRUCTIONS BEFORE OPERATING Thank you for purchasing your ATD Halogen Light. Before attempting to operate your new Halogen Light, please read these instructions thoroughly. You will need these instructions for the safety warnings, precautions, and assembly, operation and maintenance procedures. SAFETY • Before moving your halogen light or replacing a broken part, always make sure that the cord is unplugged and that the light has cooled. • This unit must not be immersed in water.
Troubleshooting Symptom Lamp will not operate Possible Cause Corrective Action Bulb broken Replace bulb Poor contact between lamp Check to see if lamp is securely and socket installed into socket Improper wiring Have unit checked by a qualified electrician Incorrect voltage; voltage at Have power supply checked by a fixture too high/low qualified electrician
