ATD-10528 4PC 18V LITHIUM ION CORDLESS COMBO KIT Instruction Manual 1
Cordless Drill PRT10528-01 Please read this MANUAL carefully before using the tool. PRODUCT SPECIFICATIONS Rated Voltage 18V DC No-load Speed 0~350 / 0~1200Rpm Chuck ½’’ Max Torque 22N.M (16.2 lb.
Product Features 5 1. 2. 3. 4. 5. 6. 7. 8. 1 6 2 LED work light Variable speed trigger Bit holder Battery High/low gear slide switch Forward/Reverse switch Soft grip handle Battery lock button 7 3 8 4 Operation Only use tool bits which can be securely fastened in the chuck and for which the drill has been designed. 1. Drilling Check whether the drill bit is correctly inserted and tightly fastened before you start the machine. Use properly sharpened drill bits.
. Drilling in Plastic For drilling in plastic use a steel drill bit and follow the same instructions as for drilling in wood. 5. Drilling in Stone, Brick, Masonry For drilling in walls, stone, masonry etc. use a masonry-bit. Do not put too much pressure on the machine. Follow the same instructions as for drilling in metal. 6. Using the drill as a screwdriver Before using the machine check whether the screwdriver bit is inserted correctly.
Cordless Impact Wrench PRT10528-02 PRODUCT SPECIFICATIONS Rated Voltage 18V DC Impact Power 0~3000 Ipm No-load Speed 0~2000 Rpm Anvil Size ½” Rate Torque 230 N.M (169.7 ft.lb) Max Torque 280 N.M (206.6 ft.
Product Features 1. 2. 3. 4. 5. 6. 1 4 LED work light Variable speed trigger Battery Forward/Reverse switch Soft grip handle Battery lock button 2 5 6 3 Assembly Selecting Correct Socket Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and /or damage to the bolt or nut.
Cordless Reciprocating Saw PRT10528-05 Technical Data Rated Voltage DC 18V No-load Speed 0-2800/min Stroke length 22mm (0.87’’) Charging Time 3-5 hours Product Features 7 6 1 2 3 4 5 7 1. 2. 3. 4. 5. 6. 7.
ASSEMBLY WARNING: Always remove battery pack from your saw when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. Inserting/Removing Battery Pack TO INSERT: 1. To insert the battery pack by sliding battery pack into the body of the tool. Insert the battery pack until the battery latches lock. TO REMOVE: 1.
GENERAL CUTTING (Fig. 6) Hold your saw firmly in front of and clearly away from you. Make sure saw blade is clear of any foreign material. Be sure material to be cut is held firmly. Small work pieces should be securely clamped in a vise or with clamps to the work bench or table. Mark the line of cut clearly. Depress the lock-off button, then pull switch trigger to start the cutting action. Place the base assembly against the work piece. Then move the blade into the work piece. Do not force.
METAL CUTTING (Fig. 8) Metals such as sheet steel, pipe, steel rods , aluminum, brass and copper may be cut with your saw. Be careful not to twist or bend the saw blade. Do not force. We recommend cutting oil when cutting most soft metals and steel. Cutting oil will also keep blades cool, increase cutting action, and prolong blade life. Never use gasoline since normal sparking of motor could ignite fumes.
Cordless Light PRT10528-06 1. 2. 3. 4. 5. 1 Rotatable 90°head On/off switch Soft grip handle Battery Battery lock button Technical Data 3 2 Rated Voltage DC 18V LED Light power 1W Charging Time 3-5 hours Battery 1300mAh 5 4 Tool Operation The ON/OFF Switch Turn cordless flash light ON by depressing the switch. To turn the tool OFF, release the switch. Remove Battery Pack Press the battery-lock button and pull downward.
Charger PRT10528-04 _____________________ Technical Data Model HP2270380B Rated Input Voltage AC 100-120V, 60Hz Rated Input Power Max 0.25A Rated Output Voltage DC 22.
Operation To Charge the Battery 1. Connect the charger cord to the charger base 2. Firmly insert battery pack onto charger base 3. Plug the battery charger (adapter) to power source (100-120V / 60Hz). 4. The Red LED light on the charger base will come on when the unit is plugged in and has power. 5. When the battery is full charged, the Red and Green light will be lighted on. The proper charging time is 3-5 hrs. Unplug charger after charging is complete and whenever it is not in use.
To Detach Battery Pack z Depress both battery-release buttons located on the side of the battery pack to release the battery pack. z Slide the battery pack back to remove it from the tool. CAUTION: When placing battery pack in your cordless impact wrench, be sure raised rib on battery pack aligns with groove in wrench’s battery port and latches snap in place properly. Improper assembly of battery pack can cause damage to internal components.
2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any other way. Do not use any adapter plugs with electrically grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with electrically grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. c) Do not expose power tools to rain or wet conditions.
c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Make sure the stored, idle power tools are out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools.
