Specifications

REV03‐13













ConnectingYourInverter

1. MakesuretheON/OFFrockerswitchlocatedonthefrontpaneloftheinverterisintheOFF(0)position.
2. Removeyourcigarettelighterandpushthe12voltpowerplugfirmlyintothecigarettelighterreceptaclein
yourvehicle.
3. Turntheinverterrockerswitchtothe ON
(I)position.TheGREENLEDIndicatorlightshouldglow,confirming
thatthereispowerrunningtothein verter.
4. Confirm that the appliance to be operated is turned OFF. Turn the inverter rocker switch to the OFF (0)
position.PlugtheapplianceintotheACreceptacleonthefrontpanel
oftheinverter.
5. TurntheinverterrockerswitchtotheON(I)position.Turntheequipmentorapplianceon.
Note
• Useofanextensioncordfromtheinvertertotheapplianceorequipmentbeingoperatedwillnot
significantlydecreasethepowerbeinggeneratedbytheinverter.Forbestoperatingresults,theextension
cordshouldbenomorethan50feetlong.
• IfthegreenLEDblinkswhenyoufirst
turntheinverterON,thisindicatesthatthereisashortcircuitwithin
thepowersupply.TurntheinverterOFF.Removethe12voltplugfromthecigarettelightersocket,firmly
• Reinsert the plug, and thenturn the inverter ON again. If this doesnot remedythe problemtry
using a
different12voltpowersource.
