User`s guide

Installation and Setup

Figure 9 Installation of the Transfer Line through the Rear

Panel

2. Install a union (P/N 0497-2073 for capillary columns or

P/N 0992-0145) into the bracket (P/N N610-1462) fir

wide bore or packed columns using two hairpin cotters

(P/N 0992-3058).

3. Clamp the bracket assembly to the speed nut installed in

Step 1, with the 8-32 pan Head screw (Part No. 0000-

2057).

4. If packed columns will be used or may be used

occasionally instead of capillary columns, ensure that

the braze assembly (P/N N610-0188) has been installed.

See Connecting a Packed Column on page 66 for details

of connecting a packed column to the fused silica

transfer line.

5. Install the fused silica transfer line or column at the

ATD/TD as outlined in Installation at the ATD/TD on

page 57.

Bracket

(P/N N610-1462)

Fan Guard

Silica Transfer Line

(P/N L116-1484)

Stainless Steel

Sleeve

Union for Capillary

(P/N 0497-2073)

Union for

Wide Bore Column

(P/N 0992-0145

Oven

Sensor

Capillary

Column