User`s guide

Troubleshooting
349
Status Description
HEATER
RATE FAIL
ZONE 2
Contact your PerkinElmer Service
Representative if you get this message.
HEATER
RATE FAIL
ZONE 3
Contact your PerkinElmer Service
Representative if you get this message.
HEATER
RATE FAIL
ZONE 4
Contact your PerkinElmer Service
Representative if you get this message.
Contact your PerkinElmer Service
Representative if you get this message.
INITIALIZE
FAILURE
One of the elements cannot be initialized.
MAG Contact your PerkinElmer Service
Representative if you get this message.
MAGAZINE
NO INDEX
Contact your PerkinElmer Service
Representative if you get this message.
MAGAZINE
BAD INDEX
Contact your PerkinElmer Service
Representative if you get this message.
MAGAZINE
REMOVED
If the magazine is in place, check the sensor
alignment or sensor could have failed. If you
still get this message after doing these checks
contact your PerkinElmer Service
Representative.
MTR1 Contact your PerkinElmer Service
Representative if you get this message.
MTR2 Contact your PerkinElmer Service
Representative if you get this message.
NO TUBES IN
FIRST - LAST
Check the loaded Vial positions compared to
the selected range.
OVEN FAIL
AT COOL
POSITION
Contact your PerkinElmer Service
Representative if you get this message.