User`s guide

Routine Maintenance

292

To replace fuses:

1. Ensure that the power cord is disconnected from the

power entry module on the rear left side of the

instrument. The fuse drawer is located in the top portion

of this module. Refer to Figure 84.

2. Carefully pry the fuse door open with a flathead

screwdriver.

3. Use the flathead screwdriver to slide out the fuse

drawer.

4. Remove the blown fuse and replace it with a new one of

the correct type and rating. Consult the fuse chart. Both

fuses must have the same rating.

5. Replace the drawer and close the fuse door.

6. Reconnect the line cord.

7. Resume normal instrument operation.

Table 22 ATD/TD Fuses

WARNIN

For continued protection against risk of fire, replace only

with the same type and rating of fuse.

Voltage

@ 50/60 Hz

Fuse

(250V rated)

Part Number

100 T 10A M041-7002

120 T 10A M041-7002

220 T 5A M041-7038

230-240 T 5A M041-7038