User`s guide

Introduction

Possible hazards that could harm the user or result in damage to the

instrument are clearly stated throughout this manual.

Before using this instrument it is essential to read the manual

carefully and to pay particular attention to any advice it contains

concerning potential hazards that may arise from the use of the

instrument.

Electrical Safety

Electrical Protection- The following precautions have been taken to

provide electrical protection.

Table 2 Electrical Protection

If you suspect for any reason that the instrument is not electrically

safe for use, do not operate it and secure it against any unorthorized

operation. Have the equipment inspected by a PerkinElmer Service

Engineer or similarly qualified person.

The instrument is likely to be electrically unsafe when it:

• Has been subjected to severe transportation stresses.

• Shows visible damage.

• It has been subjected to prolonged storage under

unfavorable conditions.

WARNIN

The protection provided by this equipment may be impaired,

if the equipment is used in a manner not specified in this

manual

Insulation Class I as defined in IEC 1010-1.

Pollution

Degree

This equipment will operate safely in environ-

ments that contain non-conductive foreign matter

and condensation up to Pollution Degree 2 as

defined in IEC 61010-1.