User`s guide

Routine Maintenance
257
Standard Leak Test
To perform a standard leak test go to the Tools drop down menu and
select Maintenance and select Leak Test. Once you select Leak
Test the following screen will appear. Press OK to begin the Leak
Test.
If your GC has passed the leak test then proceed to the Column Leak
Test.
Impedance Calibration
See the section Tube and Trap Impedance Test for the TurboMatrix
650, later in this chapter for detailed information on this feature.
Column Leak Test
To perform the column leak test, cap one end of the column and/or
transfer line with a septa. Now go to the Tools drop down menu and