User`s guide

Operation
163
Single Method Operation—If you select single method operation
you can also specify the method to be used. The options on the Run
tab will allow you to enter a range of tubes to be analyzed and you
will be allowed to select a method from a drop-down menu.
Instructions are also provided on the tab.
Single Method Operation with a Pre-selected Method—This
option allows you to select the method to be used for the selected
tube range. The Run tab is further simplified to allow the user to
enter the tube range. The method you selected will be displayed on
the Run tab. Enable the option and then select the desired method
from the drop down list of pre-programmed methods.
Multiple Method Operation—If you have selected multiple
method operation, you will be able to use any of the pre-
programmed methods to run analyses or create a sequence.
Multiple Method Operation with Method Editing Disabled—
You can disable method editing by selecting this option. The you can
select any of the pre-programmed methods to run analyses or create
a sequence, but you cannot edit the methods in any way.
Config Tab
The Config tab provides the controls that will configure the
instrument for the methods selected.