User`s guide

Operation
157
Open Command—To revise an existing method, select the Open
command from the File menu. Select the method that you wan to
edit and press OK.
Save/Save As Command—Use these commands to save new
methods or update existing ones.
1. Select the Method Editor tab and enter or update the
desired method parameters.
2. Select Save if you are updating an exiting method. It
will be saved with the same name.
3. Select Save As if you are creating a new method. Enter
a new name for the method by pressing the Name field.
An alphabetic keypad is displayed. Enter the desired
name. To enter numeric characters, press the Num key.
To enter upper case text, press Shift.
Figure 46 Data Entry Dialog Box
4. Press Alpha to return to the alphabetic keypad.
NOTE: If a name is already displayed in the name field press the
Del key to delete the characters.
5. Press OK to enter the new name for your method and
then press OK to save the method. Press Done to