User`s guide

Operation
151
Pneumatics Tab
The Pneumatics tab (PNU) displays the pressure settings for your
application.
Figure 42 Pneumatics Tab (TurboMatrix 300 TD, TurboMatrix
350 ATD and TurboMatrix 650 ATD)
PPC (Programmed Pneumatic Control) is a feature available in the
TurboMatrix 300 TD, TurboMatrix 350 ATD and TurboMatrix 650
ATD ).
Desorb Flow Rate-The desorb flow rate is maintained during the
desorb time when the tube is switched into the carrier gas stream.
Sample is carried from the tube onto the cold trap. Set the Desorb
flow rate by accessing the entry field and incrementing or
decremented the displayed value with the plus/minus buttons.
Outlet Split- Set the Outlet Split flow rate by accessing the entry
field and incrementing or decremented the displayed value with the
plus/minus buttons. This option must be enabled via the check box
on the Options tab.