User`s guide

Operation
119
Config Tab
The Config Tab provides the means to select the instrument
configuration for the methods selected.
NOTE: For the manual pneumatic models the PPC Config and
Integrity Testing are unavailable (only available in PPC
models) and are grayed out.
See the Routine Maintenance chapter later in this guide for these
procedures. See the following figure for a view of the popup screen.
Figure 29 Config Tab
Internal Standard - This feature is optional for adding an Internal
Standard to the tube prior to desorbing onto the cold trap.
MS Mode (Mass Spectrometer mode)—This feature is optional for
connecting a Mass Spectrometer instrument. MS mode is only
available for firmware 1.83 or higher. This option keeps the outlet