User`s guide

Operation
114
Del key to delete the characters.
5. Press OK to enter the new name for your method and
then press OK to save the method. Press Done to
complete the selection and return to the Run tab.
Activate Command—This command makes the currently selected
method active. The method is loaded from memory and the
instrument is heated or cooled to the new settings.
NOTE: Do not activate a method if the TD or ATD is performing an
analysis. The newly activated method will overwrite the
current method
Delete Command—Use this command to remove an existing
method from memory. You can store up to 9 methods. If you need to
store more methods, you must use the PC control software. The
control software allows you to store a greater number of methods for
various applications.
Exit Command—The Exit command closes the method editor and
returns you to the Default screen.
Save As
Save As—Use the Save As command to save methods. If the Status
tab is open, selecting Save As, will save the current method
parameters under the filename that you specify. You can save up to 9
different methods.
1. Select Save As if you are creating a new method. Enter
a new name for the method by pressing the name field.
An alphabetic keypad is displayed. Enter the desired
name. To enter numeric characters, press the Num key.
To enter upper case text, press Cap.
2. Press Alpha to return to the alphabetic keypad.
NOTE: If a name is already displayed in the name field press the
Del key to delete the characters.
3. Press OK to enter the new name for your method and
then press OK to save the method.