Specifications

5. Ensure that the replacement ery is oriented with the ve on the right side and the on the le side,
just as the old
ery came out.
6. Connect the red #4 jumper cable and red recharging wire to the
ve (+) terminal (also marked with red),
then connect the black #4 jumper cable and recharging wire to the nega
(-) terminal. Double check all
conne
and ghten.
7. Taking care not to damage the circuit board, slide the new
ery in
8. Replace the ery compartment cover and secure in place with the Phillips head screws.
SPECIFICATIONS
ITEM # .......…....................ATD-5928
VOLTAGE ..........................12VDC
BOOST POWER .....................400CRANKINGAMPS
PEAK AMPS… …...…….. . . .. . . . . . . . . . ….1700 AMPS
BATTERY TYPE ......................SEALED,LEAD-ACID,RECHARGEABLE,MAINTENANCE-FREE,12VDC,22-AMP-HOURS
BOOSTER CABLES .................…74”,#
4 GAUGE 100% COPPER CABLES WITH 800 AMP "ALLIGATOR" CLAMPS
DIMENSIONS ….......................15.74” x 14.56” x 5.11” (40 x 37 x 13 CM)