Specifications

WARNING: Always remove the charger from the electric outlet when making adjustments, changing parts,
cleaning or working on the tool.
WARNING: Care should be taken to arrange the cords and cables so they will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
WARNING: Never ĂƩĞŵpt to plug in or operate equipment with ĚĞĨĞĐƟǀĞ or damaged wires, charger cord or
charger cord plug. Have any defeĐƟǀĞ or damaged parts replaced immediately by ƋƵĂůŝĮĞĚ personnel.
WARNING: Avoid body contact with electrically grounded surfaces. There is an increased risk of electric shock if
your body is grounded.
WARNING: If the work area is not equipped with a permanently installed Ground Fault Circuit Interrupter outlet
(GFCI), use a plug
in GFCI between the charging cord and the power receptacle.
ATD 5928 ^ƉĞĐŝĮĐ Warnings:
WARNING: Lead acid ďĂƩeries generate hydrogen gas during normal operĂƟŽŶ͘ More gas is generated when the
ďĂƩĞƌLJ is charging. Hydrogen gas is:
1. Explosive
2. Poisonous to breathe
3. Highly Ňammable
WARNING: To avoid possible damage that may shorten the unit’s working life, protect this unit from direct
sunlight, direct heat, and /or moisture.
WARNING: This system is designed to be used only on vehicles or boats with 12 volt electrical systems.
WARNING: This system is not designed to be used as a replacement for a vehicle bĂƩĞƌLJ.
WARNING: To avoid an explosion and/or the possibility of being splashed with ďĂƩĞƌLJ acid:
ͻ Never allow the red and black clamps to touch each other or for both to touch the same metal object or any electrically
ĐŽŶĚƵĐƟǀĞ material for that maƩĞƌ͘
ͻ Only ĂƩĞŵpt to jump start a vehicle or boat in a well
ǀĞŶƟlated area.
ͻ Always connect the red (+) clamp to the ƉŽƐŝƟǀĞ (+) baƩĞƌLJ terminal ĮƌƐƚ͘
ͻ Do not connect the black (
) clamp to the neŐĂƟǀĞ ( ) ďĂƩery terminal.
ͻ Connect the black (
) clamp to a non moving metal part on the engine not to the nĞŐĂƟve (
)baƩĞƌLJ terminal.