Hydraulic Body Repair Kits Owner’s Manual Capacity 4 Ton 10 Ton Model Number ATD-5800 ATD-5810 (Model ATD-5810 shown) WARNING: This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. Visit us at www.atdtools.
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
! DANGER GENERAL SAFETY INFORMATION 1. Ensure that attachments are fully engaged before applying load. 2. Ensure that load is centrally applied to attachment or ram saddle. Do not load off center. 3. Always monitor the force applied to workpiece by using a load cell and indicator or you may monitor pressure developed in the ram by using an inline pressure gauge, then calculate the applied force using the formula: F = P x A, where F = lbs.
! WARNING ! WARNING Avoid pinch points or crush points that can be created by the load or parts of ram. To help prevent material fatigue if the ram is to be used in a continuous application, the load should not exceed 85% of the rated capacity. Ram must be on a stable base which is able to support the load while pushing or lifting. Ensure ram is fully engaged into/onto adapters, extension accessories.
Basic Setup p 7KH FDSDFLW\ RI WKH ERG\ UHSDLU NLW FDQ EH VLJQL¿FDQWO\ affected f by the number of attachments used and the type of load applied. The approximate load capacity of each function setup is illustrated below. When two or more extension tubes are used together, be sure to position the shortest tube further away from the ram. A.
Note: Never use sandpaper or abrasive material on these surfaces! Lubrication A coating of light lubricating oil to pivot points and hinges will help to prevent rust and assure that pump assemblies move freel\. Storage When not in use, store with the pump piston and ram IXOO\ UHWUDFWHG Cleaning 3HULRGLFDOO\ check the pump piston and ram for signs of rust or corrosion.
Model ATD-5800 Ref No.
Model ATD-5810 Ref No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 - Part# F100-41100-000 F100-41200-000 F100-41300-000 F100-41400-000 F100-41500-000 F100-40002-000 F100-40004-000 F100-40001-000 F100-40006-000 F100-40005-100 F100-42000-100 F100-40003-000 F040-71000-000 F040-50001-000 F040-30007-001 F040-90037-K02 F040-90037-K01 F100-60000-000 F040-21000-000 F100-90009-K01 F040-51000-000 F040-90107-K02 F100-50000-000 F100-00001-000 ATD-5810-L0 5800-0309 Description Extension Tube (27") Ex
Load - Pressure Correlation for model ATD-5800 & ATD-5810 Always monitor the force applied to workpiece by using a load cell and indicator or you may monitor pressure developed in the ram by using an inline pressure gauge, then calculate the applied force using the formula: F=PxA where F = Force/Load (lbs.) P = Hydraulic working pressure (psi) A = Ram effective area (in²) For model ATD-5800, A = 0.998 in² For model ATD-5810, A = 2.411 in² Example1 Model ATD-5800 lifting 5,000 lbs.
REPLACEMENT PARTS Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of this kit are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model number, serial number and description. Call your distributor for current pricing. ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools, Inc.