Installation guide

Telephone Line (PoTL)

Open Hardware Design

No vendor lock-in. Open to improvement by

anyone.

Open Source firmware

Linux, OpenWRT, B.A.T.M.A.N., and Asterisk.

Stable, reliable community developed software.

Open to improvement, adaptation, and innovation.

Asterisk

Extremely configurable, add IVR menus, connect

IP Phones and billing systems

5.2 Appendix B - MP01 Specifications

Hardware Specifications

 Atheros AR2317 system on a Chip (SoC)

 MIPS 4k processor 180 MHz

 8 MByte Serial Flash EEPROM

 16 MByte RAM

Wireless LAN

 IEEE 802.11b/g

 Frequency Band: 2.412GHz to 2.484GHz

 Antenna Type: Internal Omnidirectional PCB Antenna with I-PEX

connector

 Transmit EIRP power: 1-24 Mbit 20dBm or 36-54 Mbit 17dBm

Interfaces/Ports

 LAN Port : 1 x RJ-45

 FXS Port : 1 x RJ-11

Firmware

 Linux kernel 2.26.3

 OpenWrt Kamikaze (customised version)

 B.A.T.M.A.N. mesh routing daemon Version 0.4

 Asterisk 1.4.11

Environmental

 Operating Humidity: 5 to 95% Condensing

 Operating Temperature: -20°C to +70°C

Electrical

 Power Options: AC adaptor, Passive PoE or PoTL (Power over Telephone

Line)

 PoTL Wire Requirement: standard 4/6 core telephone cable

 Input Power: 24VDC 300mA

 Power Consumption: 3Watt

 Passive PoE Effective Distance: 0-100 meters

 PoTL Effective Distance: 0-50 meters

 Protected Ports: DC, RJ11 phone, RJ45 Ethernet

 Protection: overvoltage, reverse DC, nearby lightning, static electricity