Product guide

www.atcom.cn 8
Chapter3 General Operation of IP4G
1. Backup
When users log in the web of IP4G, Click on Backup  Create New Backup, then they can
Backup the current system.
2. System Update
When users log in the web of IP4G, click on Options  Advanced Options  Show
Advansed Options , After click on Show Advanced Options in the web, users can see the
advanced options in the vertical menu on the left of the main page. Click on Firmware
update , users can see the following parameters in the table.
Parameter Name
Description
Type
Default
HTTP URL
The http path of the firmware file
Textbox
Null
TFTP Server
The IP address of TFTP Server where the
firmware file in.
Textbox
Null
File Name
Specify the name of your uImage-md5
firmware file, make sure to use md5 version
only
Textbox
Null
Reset Configs
Select this box if you wish to reset to factory
defaults. This will ensure a clean update, and is
highly recommended
Selected
Not selected
If users want to upload sound file, upload backup files and so on, they can refer to the link:
http://www.atcom.cn/downloads/IPPBX/ATCOM%20IPPBX%20Series%20Product%20Upgr
ade%20Guide-V1.0-EN.pdf
3. Network
After click on OptionsAdvanced OptionsShow Advanced Options, please select
Network Settings option from the vertical menu on the left of main page. Users can set IP
address, Subnet mask, Gateway, DNS what they want like the following: