Product guide

www.atcom.cn 6
Switch 1: There are two ways to provide power feeding for AX-4G, customers can use PCI slot to
give power feeding directly, in this situation, please turn the switch1 to 1 on and 2 off;
customer can also give power feeding through 4 pin power connector, and in this
situation, please turn the swith1 to 1 off and 2 on.
4 Pin Power Supply: 4 pin power supply connector.
LED1: When the channel is in communication status, LED1 will be green steady.
LED2: Network status indicator of SIM card. When the SIM card is searching network, the LED2
will blink fast; when the SIM card has found the GSM network and registered successfully,
the LED2 will flip at lower frequency.
Switch 2: Customer can turn off or turn on the SIM card manually through switch 2.
Antenna Interface: An interface used to connect with antenna.
Attention: In order to enhance the GSM signal in some hard environment, except the Antenna in
the illustration above, ATCOM can also provide one other type of antenna(TL01) which has long
cable(about one meter long) and can be connected to outside.
http://ArtTel.ru