Install guide

www.atcom.cn
2. Install Trixbox and make internal calls
Install Trixbox
The set up of Trixbox is simple. Just download the ISO file from www.trixbox.org
and record it in the CD to make an auto boot CD. PUT this installation CD and reboot
your computer, then it will format your system and install the CENTOS and Trixbox
server on it.
I am using Trixbox2.0 version on this article.
If you have question in install, you can refer the www.trixbox.org for the install guide.
Ways to Access Trixbox
There are two ways to access the Trixbox server.
 Use Web browser to open the IP of the Trixbox server to connect to the GUI
of Trixbox. After open the Trixbox web interface, you need to switch the
access mode from user to admin. The default username and password is
maint and password. This is base configure way of Trixbox. Trixbox doesn’t
support IE well. You can use Firefox to configure it.
 Use the SSH tool to access the Trixbox server. in this way the use name is
root and password is the password you input when install the Trixbox.
Most of our configure job will be done in the web interface. and we will do some
advance configure via SSH tool.
Install Trixbox modules
Trixbox doesn’t install many function default, you need to install them manually. In
the web interface, go to the Asterisk -->Free PBX page --> Tools --> Module
Admin. You can see many function modules in this page. Just select all and process
the install to install all these modules.
Notice: every change on the Trixbox will show a red section ask you to apply the
change via click the link.
Add extensions
At first, we need to add some extensions to make internal calls. Each extension acts as
an internal number. There are many types of extensions, we will use SIP, IAX2 and
ZAP extensions on this article.
6/32