Install guide

www.atcom.cn
System set up
We use following devices in our set up:
1: Server with Trixbox installed: we also install AX-100p and AX-400p in this
server, we install two AX-110S FXS modules and two AX-110X modules, so you can
connect three PSTN lines and two normal phones. So there are five analog ports on
the Trixbox server. one FXO port from AX-100p, two FXO port from AX-400p. two
FXS ports from AX-400p.
2: Normal phone: connect to the AX-400p FXS ports.
3: Working PC, x-lite runs on this computer act as a sip extension.
4: AT-530 IP phone, register to Trixbox to act to as SIP or IAX2 extension.
We want to provide below function in our simple application.
1: free internal call.
2: Voice Mail.
3: make out bound call
4: IVR system.
We will implement these functions step by step.
5/32