Install guide

www.atcom.cn
machine. FXS interfaces get phones plugged into them, delivery battery, and
provide ringing. FXS interfaces are signalled with FXO signalling.
FXO (Foreign eXchange Office) is an interface that connect to a phone line. They
supply your PBX with access to the public telephone network. FXO interfaces
use FXS signalling. FXS interfaces are what allow you to hook telephones to
your PBX, and FXO interfaces allow you to connect your PBX to real analog
phone lines.
Configure AX-100p and AX-400p on Trixbox
There is a command genzaptelconf can generate the configure file of AX-100p and
AX-400p automatically.
Use the SSH tool to connect Trixbox server and run:
[root@asterisk1 ~]# genzaptelconf
Trixbox will then auto detect zaptel hardware and install AX-100p and AX-400p
driver automatically.
You may see below info in this process:
Loading wcfxo: wcfxo: DAA mode is “FCC”
Found a Wildcard FXO: Wildcard X100P. //Detect AX-100p card
Loading wctdm: Freshmaker version 7
Freshmaker pass register test
Module 0: Installed – AUTO FXS/DPO
Module 1: Installed – AUTO FXO (FCC mode)
Module 2: Installed – AUTO FXO (FCC mode)
Module 3: Installed – AUTO FXS/DPO
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
//Detect AX-400p card
Which indicate that Trixbox detect and install AX-100p and AX-400p successfully
And type:
[root@asterisk1 ~]# ztcfg -vvv
To see the channel state:
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
11/32