User manual

AT800 Series User Manual
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
2. Manual Settings. Change day and time manually
3. NTP Settings. Get the date and time information from a NTP Sever. Modify NTP server
and Time Zone.
4. Date Format. Change date format between day/month and month/day.
5. Time Format. Change time format between 12hr and 24hr.
 Press save
Reboot
Reboot phone:
 Press menu
 Scroll to reboot, then press select
 Press OK to reboot the phone, Cancel to exit without rebooting the phone.
Product Info
To view information about the Product:
 Press menu softkey
 Scroll to Product Info, then press select
 Review the following information:
1. Product Name: AT800
2. Serial Number: Product Serial Number
3. Software Version: Software version of the product
4. Hardware Version: Hardware Version of the product
5. MAC Address: MAC address of LAN port
6. Protocol: SIP
Network
Set mode on LAN port and PC port.AT800x supports static IP, DHCP client and PPPoE on LAN port. AT800
can work as bridge and router mode on PC port, and AT800D can only supports bridge mode.
LAN port
To view and edit LAN port Network parameters:
 Press menu softkey
 Scroll to Network, and press select
 View the status,