Operating instructions

The AT100 Address Book
33
A pop up window displays where you can enter the new contact’s first name. Type the contact’s name
up to sixteen (16) characters, and press “Enter”to continue, or, press "Esc" to choose different field to fill
in. Choose an information field using the up and down navigation key and then press
"Enter" to select it.
As you enter information for your contact, a check mark ( ) appears beside the menu selection for each
field. When you press “Enter”to save your entries, the cursor will automatically move to the next field in
the menu.
Use the Wireless Address field to enter a contact’s 2Way number. Note that fields requiring numbers
are automatically set up for you to type numbers up to sixty four (64) charaters and digits. You will not
need to press "Alt" in these fields to type numbers.
You can enter up to three email addresses for each contact. The maximum number of each address is
sixty four (64) charcters.
To enter an email address, select an Email Address field from the contact menu, and press "Enter".
Use the "Alt" key to type the @ symbol (Alt+S) and the "dot" (Alt+N). For example, to type
"[e-mail]" use the following sequence: