Operating instructions

Setting Up Your AT100
28
Use the up and down navigation keys ( ) to select a Display Timeout setting
and press "Enter".
Font
The Font setting controls whether the display font used will be bold or normal.
Set the Font by opening the Customize folder [ ] in the main menu. Select Display from the
following menu, and then select Font from the menu options.
.
Use the up and down navigation keys ( ) to choose "BOLD" or "NORMAL" and press
"Enter" to save the setting.
Font Size
The Font Size setting controls the size of the font used, and consequently, how much information
you will see on the AT100 screen.
Set the Font Size by opening the Customize folder [ ] in the main menu. Select Display from the following menu, and
then select Font Size from the menu options.