Printed in KOREA
Contents Contents Introduction Getting Started What’s in the Box? Charging the Battery Home Screen The Keyboard Navigation Keys The Main Menu Turning the AT100 On and Off Sending a Test Message Setting Up Your AT100 Message Signature My Info Password Edit My Info Review My Info 5 6 6 7 8 10 11 12 13 14 15 15 16 16 17 19 1
Setting the Time and Date Set Private Time Setting Alerts Alert Reminders Setting Audio Features Volume Control Key Click Quiet Mode Adjusting the Screen Display Contrast Display Timeout Font Font Size Quick Text Custom Replies 19 21 22 23 25 25 25 26 26 27 27 28 28 29 30 The AT100 Address Book 32 32 34 37 38 39 40 Adding a New Contact Adding a New Group Review Contacts and Groups.
Specifying an Address Not in Your Address Book Custom Text Composing Options Special Characters Multiple Choice Responses (MCR) Using Quick Text Choosing an Address Before Composing Your Message Receiving a New Message Replying to a Message Managing Your Messages Mailbox Inbox Inbox Message Options Forward an Inbox message Moving an Inbox Message to a Folder Outbox Outbox Message Options Resending a Failed Message Forwarding an Outbox message Moving an Outbox Message to a Folder Deleting Groups of Messages
Deleting Messages from a Folder Features 04 64 Alarm Schedule and Calendar Play a Game Device Power Off Battery Level Check Memory Check About Your AT100 66 66 69 70 72 72 73 74 75 IMPORTANT SAFETY INSTRUCTIONS 76 FCC Compliance 78 Limited Warranty 79
Introduction Introduction Congratulations on your purchase of the ATCOM Wireless AT100 2Way messaging device. Your new AT100, with its ability to originate, receive and respond to text messages, will quickly become a vital tool for your business and personal communications. This booklet contains operating instructions for your new device. Whether you’re a new or experienced 2Way user, these useful instructions will get you up and running quickly.
Getting Started What’s in the Box? 1.User’s Manual 2.Device 3.CD-ROM 4.Charger 5.Holster 6.
Getting Started Charging the Battery The device operates with a rechargeable lithium ion battery, included in your shipment. The expected life span of the battery is about one (1) year, and we recommend replacing the battery after a year s use. Fully charging a battery takes approximately 2 hours. Plug the charger into the device as shown, with the > symbol facing up. Use only the charger supplied with the device. While charging, the LED light on the device will be red.
Getting Started Home Screen Alarm Transmitter Status Alert Type Battery Date Service Status Time Main Menu " Time " Time and Date Set the date and time, and the time format (12 or 24-hours) Customize folder. Service Status Service Status indicates the system status depending on signal strength or the system status e.g. Storing, Basic, Full Service, and Roaming..
Getting Started Status Icons Four different kinds of status icons appear with the following indicators: - Alert Type This icon will display the type of alert set: Tone, Vibration, Vibration+Bell (tone), No Alert (silent). - Battery This icon displays the battery strength. If the Battery is fully charged, three bars display. - Alarm The Alarm icon displays when an alarm is set and enabled. - Transmitter Status You can turn the transmitter on or off in the Customize menu.
Getting Started The Keyboard The AT100 QWERTY keypad layout is similar to a PC keyboard.
Getting Started Navigation Keys Key Usage Return to previous menu Save info when composing message or adding address Press once to CAPITALIZE letters Press twice to lock CAPITALS Press again to revert to lower case letters Press once to use yellow, alternate keyboard characters Press twice to lock alternate characters Press again to revert to regular characters Delete characters to left of cursor Clr clears all characters on an input screen During composition : line return In Address Book : select current
Getting Started The Main Menu Thank you for choosing ATCOM Wireless ReFLEX Two Way Messaging Device, AT 100. The device is designed for user’s convenience in sending or receiving a message through device or internet. Please note the following brief description for Main Menu; Mailbox ( ) The Mailbox folder stores messages in one of three folders: Inbox (received messages), Outbox (sent messages), and Drafts (messages composed, but not sent).
Getting Started Turning the AT100 On and Off Turning the AT100 On Turn the device on by opening the flip and pressing the " Enter " key for 2 to 3 seconds. Turning the AT100 Off From the main menu, press the " D " key move the cursor to the Device folder and press Enter. From the options that display, select Power Off , and press " Enter " . Select " YES " and press " Enter ".
Getting Started Turning the Transmitter On and Off From the main menu, select the Customize icon. In the menu that follows, choose Setup and then Transmitter. In the pop up window that displays, select " ON " or " OFF " using the up and down navigation keys ( ). Press " Enter " to save your settings. Sending a Test Message After charging the battery and turning your AT100 on, it’s a good idea to send yourself a test message to make sure the device is working properly.
Setting Up Your AT100 Setting Up Your AT100 This section contains instructions for setting the date and time, setting your automatic message signature, setting up alerts and alarms, and other features found in the Customize menu options. Message Signature The AT100 can automatically add your signature to your outbound messages and replies. Your signature can contain your name, your name and wireless number, or other information you want to add to your messages to identify yourself.
Setting Up Your AT100 My Info My Info options include adding password protection for your device, and storing your personal information. Password Add a password to your device to prevent access to your messages and the information stored on the device. Once you set up and enable a password, you will need to enter it each time you use the device. Also, the password will need to be re-entered if the device is idle for more than five (5) seconds.
Setting Up Your AT100 Use the right and left navigation keys to choose " ON " or " OFF " and press Enter to make your selection. Type your password and then press Enter to save. Edit My Info The options found under My Info include your name, contact number and a memo. This information can be especially useful in facilitating your unit s return in the event it is lost or stolen. If you set a password (see above) and an incorrect password is typed, the information entered here will appear on the screen.
Setting Up Your AT100 Enter your personal information. Press " Enter " to save. After entering or editing your personal information, select Save My Info from the menu, and press " Enter " to save all of your information in the device. Use the right and left navigation keys to choose "YES " or " NO " and press "Enter ". If you select YES , the screen displays " My Info Saved " for a moment and you will be returned to the " Edit My Info " menu.
Setting Up Your AT100 Review My Info Review the information stored in " My Info " by selecting the Review My Info option on the My Info menu. Select the option by pressing " Enter ". The stored information is displayed. Press Esc to return to the menu. Setting the Time and Date After selecting the Customize icon from the main screen, select Setup and press " Enter " . Select " Set Time and Date " and press " Enter " .
Setting Up Your AT100 To set the time display format (12 or 24-hours), select " Time Format " and press " Enter " . Move the cursor to the desired format and press "Enter ". To set the clock, select " Set Time and Date " and press " Enter " . In the pop up window, use the right and left navigation keys ( the up and down navigation keys ( settings. ) to move from field to field. Use ) to change the values.
Setting Up Your AT100 Use the up and down navigation keys ( and press " Enter " . ) in the popup window to choose " On " or " Off " Set Private Time Use the Private Time setting to set a time when the AT100 will not produce a vibration or audible alert when it receives a message. The device will still function normally during private time, but you will not be disturbed. Private Time does not apply to any alarms you may have enabled.
Setting Up Your AT100 Select " Time " and press " Enter " to set the start and end times for Private Time. In the pop up window, use the right and left navigation keys ( down navigation keys ( ) to move from field to field. Use the up and ) to change the values. Press " Enter " to save your settings. Setting Alerts To set or change the alerts for incoming messages, open the Customize folder [ ] in the main menu.
Setting Up Your AT100 Select the alert type (Alert, Vibrate, Vibrate+Bell, or No Alert) and press " Enter " . If you select "Alert " or Vibrate+Bell, a second set of menu options appears where you can select the specific alert sound. Use the up and down navigation keys ( ) to scroll to your selection and use the " Space " key to preview the sounds. Press " Enter " to select a sound. A check mark appears on your selection and the screen returns to the Alert Type menu.
Setting Up Your AT100 Use the up and down navigation keys ( ) in the popup window to choose "Yes " and press " Enter " . Select Re-Alert to set the number of reminder alerts. Press " Enter " to continue. Use the up and down navigation keys ( ) in the pop up window to choose the number of times you want to be reminded and press " Enter " . Select Period to set the time interval between reminder alerts. Press " Enter " to continue.
Setting Up Your AT100 Setting Audio Features Volume Control To set or change your alert volume, open the Customize folder [ ] in the main menu. Select Audio from the menu that displays and press "Enter". Select Volume Control and press "Enter". Volume Control has three settings, ranging from low (1) to high (3). Use the right and left navigation keys to select the volume level, and press "Enter" to save your selection.
Setting Up Your AT100 Use the up and down navigation keys ( ) in the popup window to choose "On" and press "Enter". Quiet Mode Turn on the Quiet Mode feature when you want to continue receiving messages, but you don ’t want an alert to sound. Also keyclick and alarm will not be activated To turn on Quiet Mode, open the Customize folder [ ] in the main menu. Select Audio from the menu that displays and press "Enter", and then select Quiet Mode from the menu options.
Setting Up Your AT100 Contrast Adjust the screen contrast by opening the Customize folder [ ] in the main menu. Select Display from the following menu, and then select Contrast from the menu options. Use the right and left navigation keys to select the contrast level, and press "Enter" to save your selection. Display Timeout Display Timeout controls how long the screen display will remain visible without activity. Once the device reaches the Timeout setting, the screen will go blank to save power.
Setting Up Your AT100 Use the up and down navigation keys ( ) to select a Display Timeout setting and press "Enter". Font The Font setting controls whether the display font used will be bold or normal. Set the Font by opening the Customize folder [ ] in the main menu. Select Display from the following menu, and then select Font from the menu options. . Use the up and down navigation keys ( ) to choose "BOLD" or "NORMAL" and press "Enter" to save the setting.
Setting Up Your AT100 Use the up and down navigation keys ( ) to choose "SMALL" or "LARGE" and press “Enter”to save the setting. Quick Text Use Quick Text to save time when composing a message. You can create up to 10 phrases or sentences, each consisting of up to 48 characters. To use a Quick Text sentence or phrase during composition, press the key to access the Quick Text phrases. Enter your Quick Text phrases by selecting the Customize icon [ ] from the main menu, and pressing“Enter.
Setting Up Your AT100 Use the same procedure to create up to ten (10) phrases or sentences. Press "ESC" to save the Quick Text phrases. Select ”YES”and press "Enter" to save. To cancel, select "NO" or press the "ESC" key. Custom Replies Enter up to 10 custom replies that can be used to send a quick reply without typing. Custom replies can be as simple as "Yes" and "No", or can be an instruction, such as "Send a number to call".
Setting Up Your AT100 Type a custom reply and press the "Enter" key. Continue to enter your custom replies. Press the "ESC" key when you are ready to save them. Select "YES" and press "Enter" to save. To cancel, select "NO "or press the "ESC" key.
The AT100 Address Book The AT100 Address Book The AT100 address book can hold up to 250 individual contacts, and up to 20 groups with 20 contacts each. Each individual contact can contain up to 10 pieces of information, including first and last name, wireless address, email address, work, home, mobile and fax numbers, company name, mailing address, and notes. Once you have entered individual contacts, you can define up to 20 Groups.
The AT100 Address Book A pop up window displays where you can enter the new contact’s first name. Type the contact’s name up to sixteen (16) characters, and press“Enter”to continue, or, press "Esc" to choose different field to fill in. Choose an information field using the up and down navigation key and then press "Enter" to select it. As you enter information for your contact, a check mark ( ) appears beside the menu selection for each field.
The AT100 Address Book Press "Enter" to save your entry. When you have completed entering information for a contact, press the "ESC" key. Select“YES”and press "Enter" to save all of the information entered for the contact. If you do not want to save your entry, select "NO". You can also select "Save Entry" from the menu and press "Enter" to save the contact information. In either case, the screen displays "Entry Saved" for a moment, then returns to the "Address Book" menu.
The AT100 Address Book To add a new group to your AT100 Address Book, select Address Book [ ] from the main menu, and then select New Group from the option list. Press "Enter" to make your selections. In the window that opens, enter the Group Name using keypad. Press "Enter" to continue. To add an individual contact to the group, use the up the Add Entry option, and press "Enter". and down navigation keys to select Your list of individual contacts appears.
The AT100 Address Book Continue to add contacts (up to 20) to the group following the instructions above. When you have completed your contact selections, press "Enter" to return to the previous menu. Review your new group by choosing Review Entry from the menu and pressing, "Enter". The addresses selected for the group will appear. Press "Enter" or "ESC" to return to the previous menu. Save your new group by selecting Save Group and pressing "Enter". "Group Saved" will briefly appear on the screen.
The AT100 Address Book Review Contacts and Groups. You can quickly look up contact and group information in the AT100 Address Book. To review a contact or group, select Address Book [ ] from the main menu, and then select Contacts or Groups from the option list. Press " Enter " to make your selections. Use the up and down navigation keys to select a contact or group from the list that appears and press "Enter ".
The AT100 Address Book Deleting Contacts or Groups To delete a contact or group, select Address Book [ option list. Press " Enter " to make your selections. ] from the main menu, and then select Contacts or Groups from the Use the up and down navigation keys to select a contact or group from the list that appears and press Enter. You can also quickly scroll to a contact by typing the first few letters of the contact or group name. The contact or group matching the letters typed is highlighted.
The AT100 Address Book Editing Contacts To edit a contact, select Address Book [ to make your selections. ] from the main menu, and then select Contacts from the option list. Press "Enter" Use the up and down navigation keys to select a contact from the list that appears and press " Enter ". You can also quickly scroll to a contact by typing the first few letters of the contact name. The contact matching the letters typed is highlighted. Select the entry by pressing " Enter ".
The AT100 Address Book When you have completed modifying the contact information, press the "ESC " key. Select "YES " and press "Enter " to save your edits. If you do not want to save your edits, select " NO ". You can also select " Save Entry " from the menu and press "Enter " to save the edited contact information. In either case, the screen displays "Entry Saved " for a moment, then returns to the " Address Book " menu.
Messages You can change the Group name, and add and delete entries. Use the up and down navigation keys to select an option, and make your changes on the screens that appear. After changing group information, review the changed entries by selecting Review Entry from the option list. Save your edited group by selecting Save Group and pressing " Enter ". "Group Saved " will briefly appear on the screen.
Setting Up Your AT100 A new, blank screen appears. Use the keypad to enter your message. After completing the message, press " Enter " to continue. (You can save a draft of your composed message at this point by pressing the " ESC " key. Save the unsent message by selecting " YES " in the " Save as Draft " popup box.) Your list of contacts appears. Use the up and down navigation keys to select the recipient, and press " Enter ".
Setting Up Your AT100 " Sending " appears briefly on the screen, and you will be returned to the Main menu. Specifying an Address Not in Your Address Book You can send your message to an address that doesn’ t appear in your address book by choosing Onetime Address on the Select Address screen and pressing " Enter ". Use the up and down navigation keys to select an address type and press " Enter ". Type the address in the window that appears, and then press " Enter ".
Setting Up Your AT100 " Sending " appears briefly on the screen, and you will be returned to the Main menu. Custom Text Composing Options You can access and use special characters (e.g., +, =, >, etc.) in your messages, add Multiple Choice Responses to your messages, and use " Quick Text " entries to help you compose your messages. Special Characters To use a special character while composing a message, press . Use the right and left navigation keys to scroll through the available special characters.
Setting Up Your AT100 Multiple Choice Responses (MCR) Attach Multiple Choice Responses (MCRs) to your messages to make replying fast and easy. For example, you might want to add your available meeting times to a message requesting a meeting: Message : Let s meet to discuss the contract. Let me know what time works for you. MCRs : 1:00, 2:00, and 4:00. When you add MCRs to your message, the message recipient can quickly reply by using one of the attached MCRs.
Setting Up Your AT100 Type a short response in the popup screen that appears, and then press " Enter " to save it. Use the up and down navigation keys to choose another line and press " Enter " again. Type a second short response and press Enter. Continue to enter up to 8 MCRs for the message, then press " ESC " twice to return to the Message screen. Note that a small " MCR " icon displays on the upper right corner of the screen. From here, continue to compose and send the message normally.
Setting Up Your AT100 Choosing an Address Before Composing Your Message. As an alternative to composing a message before choosing a contact or group, you can also choose the contact or group before composing a message. This feature comes in handy when you need to add a new, permanent contact or group to your address book and then immediately compose and send a message. To choose a contact or group before composing a message, select Address Book from the main menu and press " Enter ".
Setting Up Your AT100 Compose your message as you would normally. After composing, press " Enter " . The message recipient (contact name or group name) appears at the top of the following screen, and Send Message should be highlighted. (If not, use the up and down navigation keys to highlight Send Message). Press " Enter " to send the message. "Sending " appears briefly on your screen, and you are returned to the Address Book screen.
Setting Up Your AT100 To read the new message, choose " YES " by using the right and left navigation keys, and then pressing " Enter " . The message appears on your screen. If you do not want to read the message right away, choose " NO " in the " New Message " pop up. The unread message will be filed in your Inbox so that you can view it at a later time. Replying to a Message After reading a message, press " Enter " or to send an immediate reply. Use the up and down and press " Enter " to continue.
Setting Up Your AT100 Managing Your Messages Your new AT100 contains three areas to store messages. The Mailbox contains three folders: The Inbox, for received messages; the Outbox, for sent messages; and the Drafts folder, for composed, unsent messages. The News/Info Inbox stores news feeds sent by your service provider. To permanently save important messages, use the Folders area. You can name and populate up to three subfolders for messages that you do not want to lose.
Setting Up Your AT100 Inbox The AT100 Inbox stores messages that have been sent to you. From the Inbox, you can read your messages, reply to them, forward messages to other recipients, and delete messages. The inbox will hold up to 400 messages, deleting the oldest message as a new message arrives. To work with messages in your Inbox, select the Mailbox icon Enter ". on the main screen and press " The Inbox will be highlighted in the option list.
Setting Up Your AT100 To read a message use the up and down navigation keys to highlight the message, and then press " Enter " to open it. The selected message displays. The time and date that the message was received displays at the end of the message. If the message is longer than one screen, press " Enter " to move to the next page, or use the up and down navigation keys to scroll through the message. Inbox Message Options After reading a message from the Inbox, press " Enter " to see your options.
Setting Up Your AT100 Forward an Inbox message After reading a message in your inbox, use the up and down navigation keys to select Forward Message from the message option list and press " Enter ". You can forward the message to another 2Way pager, email or to Group in your Address Book. To edit or add to the message, select " YES " in the pop up box. The original message appears on your screen.
Setting Up Your AT100 " Sending " appears briefly on the screen, and you will be returned to the Main menu. Moving an Inbox Message to a Folder To permanently save an Inbox message, select the Move to Folder option from the Inbox Options list. The screen will display the available Folders. Use the up and down navigation keys to select a folder and press " Enter ". " Moved to Folder " briefly displays on your screen, and you will be returned to the Inbox message list.
Setting Up Your AT100 Outbox The AT100 Outbox stores messages that you have composed and sent, and also stores pending outbound messages and outbound messages that where sending failed. This can occur when your AT100 is not in a full service coverage area, or if an incorrect address was keyed. The Outbox stores up to 400 messages, deleting the oldest message as a new message is sent. To work with messages in your Outbox, select the Mailbox icon Enter ".
Setting Up Your AT100 To read a message use the up and then press Enter to open it. and down navigation keys to highlight the message, a The message is displayed on your screen.. Outbox Message Options After reading a message from the Outbox, press Enter to see your options. Depending on the length of the message, you may have to press Enter more than once.
Setting Up Your AT100 You now have six options: Next Message. Choosing this option will display the next message in the message list. Resend Message. This option allows you to quickly resend a failed message to the same address originally specified. Forward Message. Choose this option to send the message to another 2Way device or email address, or to a message Group that you have setup in your Address Book. Delete Message. Select this option to permanently remove the message from the Outbox. Move to Folder.
Setting Up Your AT100 " Sending " briefly displays on your screen, and you will be returned to the " Mailbox " menu. Forwarding an Outbox message After reading a message in your Outbox, use the up and down navigation keys to select Forward Message from the message option list and press " Enter ". You can forward the message to another 2Way pager, email or to Group in your Address Book. To edit or add to the message, select YES in the pop up box. The original message appears on your screen.
Setting Up Your AT100 Select Send Message from the option list, and press " Enter " to send the message. " Sending " appears briefly on the screen, and you will be returned to the Main menu. Moving an Outbox Message to a Folder To permanently save an Outbox message, select the Move to Folder option from the Outbox Options list. The screen will display the available Folders . Use the up and down navigation keys to select a folder and press " Enter ".
Setting Up Your AT100 Deleting Groups of Messages from the Inbox or Outbox You can quickly delete all read messages or all of the messages contained in your Inbox. Select the Mailbox icon from the main screen, and press Enter. Choose Inbox or Outbox from the option list and press " Enter " to make your selection. Press the key. Choose Delete Read Msg or Delete All Msg from the option list using the up down navigation key. Press " Enter ", and Select YES in the confirmation pop up, and press " Enter ".
Setting Up Your AT100 News/Info Inbox The News/Info Inbox stores news and information messages sent by your service provider. You can designate a different type of alert for news messages so that you can distinguish a regular message from a news message. Your AT100 can store up to fifty (50) news messages in any of eight folders. To read a news message, select the News/Info Inbox icon ( " Enter ". ) from the main menu and press Use the up and down navigation keys to select a folder, and press " Enter ".
Setting Up Your AT100 Folders Use Folders to permanently save your important messages. You can name and populate up to three folders for messages that you do not want to lose. Each folder stores forty (40) messages. Naming Folders You can individualize the three folders by giving each a name. For example, you might want to save messages pertaining to important projects, and name each folder with a project title. To name a folder, select the Folder icon ( Use the up ) in the main menu and press Enter.
Setting Up Your AT100 Type the name of the folder and press " Enter " to save the name. Press " ESC " to return to the main menu. Reading Messages in Folders Select the Folder icon ( ) in the main menu and press " Enter ". Use the up and down navigation keys to choose a folder, and press " Enter ". Select a message from the list by using the up and down " to open the message. The message displays on the screen.
Setting Up Your AT100 Folder Message Options While reading a message in a folder, press to view a list of options for the message: Next Message. Choosing this option will display the next message in the folder message list. Forward Message. Choose this option to send the message to another 2Way device or email address, or to a message Group that you have setup in your Address Book. Delete Message. Select this option to permanently remove the message from the Folder. Move to Folder.
Setting Up Your AT100 Confirm your selection by choosing " YES " in the confirmation popup box. " All Msgs Deleted " will briefly display on your screen, and you will be returned to the " Folders " main screen.
Setting Up Your AT100 Features Alarm Use the AT100 Alarm feature to wake you up in the morning or remind you of an important meeting. To set an Alarm, select the Applications icon ( ) in the main menu, and press " Enter ". Select Alarm in the option list and press " Enter ". Select Enable Alarm from the options and press " Enter ".
Setting Up Your AT100 Choose " YES " from the pop up window and press " Enter " . Select Period from the option list and press " Enter " to set how often the alarm should sound : once, daily, or weekday. Choose an option(Once, Daily, Weekday) from the pop up window and press " Enter " Weekday option : AT100 alerts only on Mon, Tue, Wed, Thu, and Fri. Weekday Set the type of alert sound by choosing Alert Type from the option list. Press " Enter " to continue.
Setting Up Your AT100 Select Alarm Time from the option list and press " Enter ". Use the right and left navigation keys ( ) to move from field to field. Use the up and down navigation keys ( ) to change the values. Press " Enter" to save your settings. Select Snooze from the option list to set the amount of time when the alarm will go off again after being turned off. Press " Enter " to select the feature. Select one of four options in the popup window and press " Enter ".
Setting Up Your AT100 Schedule and Calendar Enter your daily schedule into your AT100 and you will be able to carry it with you where ever you go. You can also use this feature as a handy reference calendar. You can store ten (10) schedule on your AT100. To enter your schedule into the AT100, select the Applications icon ( and press " Enter ". ) in the main menu, Select Schedule from the option list and press " Enter " to continue. The cursor will be placed on the date if it has been set. .
Setting Up Your AT100 After adding an event to your schedule, the date on the calendar will appear in bold. Repeat the procedure above to add additional events to your AT100 schedule. Play a Game Play the Block Down game by select the Applications icon ( Enter ". ) in the main menu, and pressing " Select Game (Block Down) from the option list, and press " Enter" . The simple instructions for the game appear on the screen. For example, to rotate a piece, use the up navigation key.
Setting Up Your AT100 Start the game by pressing " Enter ". To quit the game, press " ESC ".
Setting Up Your AT100 Device Options found in the Device area include turning the device off, viewing the battery charge level, viewing the amount of memory remaining in the mailbox and address book, and viewing information about your AT100, including the model number and cap code, which you may need when calling customer service. Power Off Select the Device icon ( ) in the main menu, and press " Enter " . To turn off the power, select Power Off from the option list, and press " Enter ".
Setting Up Your AT100 Battery Level Check Select the Device icon ( ) in the main menu, and press " Enter " . To check the battery charge level, select Battery in the option list and press " Enter " . The current charge level of the battery is displayed as a percentage (%) and on a bar graph.
Setting Up Your AT100 Memory Check Select the Device icon ( ) in the main menu, and press " Enter " . To check the amount of memory being used by your mailbox and address book, select Memory from the option list and press " Enter ". The amount of memory being used by the Mailbox and Address Book features is displayed in a bar graph format. Press " Enter" to view the memory being used by the Inbox, Outbox, Drafts, News and Folders. The memory usage of each folder displays.
Setting Up Your AT100 About Your AT100 Select the Device icon ( ) in the main menu, and press " Enter " . Select About in the option list to view information about your AT100 device, and press " Enter ". The device information displays. Press " Enter " or" ESC " to return to the previous menu.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Read and save these instructions for future reference. Heed all warnings and Follow all instructions. 2) Do not use this apparatus near water. 3) Clean only with dry cloth. 4) Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 5) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPATATUS TO RAIN OR MOISTURE.) THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
FCC Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Warranty Limited Warranty ATCOM WIRELESS LIMITED WARRANTY ATCOM Wireless, Inc.("ATCOM") warrants to its original retail customer(s) within the United States, Canada and Mexico that, for a period of one(1)year from date of purchase or first use, ATCOM Products purchased from ATCOM authorized sellers will be free from defects in design, materials and workmanship under normal use, and will conform to ATCOM's applicable specifications.
Warranty The warranty does not apply to Product which have been tampered with or altered mechanically or electronically in any way including re-crystallization, or from defects or failure due to (i) disaster, natural circuitry, water, fire, or chemical damage; (ii) Product whose warranty/quality stickers, product serial number sticker, have been removed altered, or rendered illegible; (iv) use or operation outside of the usage parameters set forth in ATCOM's specifications, or (v) anyone other than ATCOM or
