User manual

AT-640P User Manual
ATCOM TECHNOLOGY CO. , LIMITED
B 、 Press the other plate into the slot in accordance with the direction of the
arrow
C 、 Repeat A and B. It is the right picture of putting on desk after fixing the two
feet below:
D 、 Disassemble the feet:
Press the plate with word “ PUSH ” and pull the feet with the direction of arrow.
When the plate is pull out of the slot (there will be a sound of “ pa ” ) you can
take off the feet
2 、 On wall postion
A 、 Put the bottom side of the IP phone upside and push the plate with letter
“ PUSH ” into the slot, please refer the picture as below:
B 、 Push the other plate into the slot in accordance with the direction of the arrow