User manual

AT-640P User Manual
ATCOM TECHNOLOGY CO. , LIMITED
voice mail is letters which you cannot input with the ATA , then you use the
number to stand for your username.

Voice mail text: if IAX support voice mail, config the domain name of your mail
box here.

Echo test number: If the platform support echo test , and the number is test
form , the config the test number to replace the text format The echo test is to
test the error status of terminals and platform.

Echo test text: echo test number in text format.

Refresh time: IAX refresh time.

Enable Register: enable or disable register.

Enable G.729: Using G.729 speech coding mandatory consultations.
4
4
4
4 、 Advanced
Advanced
Advanced
Advanced
4.1.
4.1.
4.1.
4.1. DHCP
DHCP
DHCP
DHCP Server
Server
Server
Server
 DHCP Leased Table: IP-MAC mapping table. If the LAN port of the phone
connects to a device, this table will show the IP and MAC address of this device.
 Leased IP Address: the IP address which is assigned.
 Client Hardware Address: the IP address assigned and the MAC opposite of IP.
DHCP Lease Table Setting:
 Lease Table Name: Lease table name.
 Lease Time: DHCP server lease time.
 Start IP: Start IP of lease table.
 End IP: End IP of lease table. Network device connecting to the AT640P LAN port
can dynamic obtain the IP in the range between start IP and end IP.

Net mask: Net mask of lease table.

Gateway: Default gateway of lease table.