User manual

AT-640P User Manual
ATCOM TECHNOLOGY CO. , LIMITED

Net mask: LAN net mask.

DHCP Service: enable LAN DHCP Server , need to reboot to make it available.

NAT: Network Address Translation.

Bridge Mode: Select Bridge Mode or not: If you select Bridge Mode, the phone
will no longer set IP address for LAN physical port ， LAN and WAN will join in the
same network. Click “ Apply ” , the phone will reboot.
3
3
3
3
、
VoIP
VoIP
VoIP
VoIP
3.1.
3.1.
3.1.
3.1. SIP1/SIP2/SIP3/SIP4
SIP1/SIP2/SIP3/SIP4
SIP1/SIP2/SIP3/SIP4
SIP1/SIP2/SIP3/SIP4

Register Status: SIP server registration status, if succeed display Registered ，
or else display Unregistered.
 Server name: SIP server name , if no special requirements just keep it as
blank.
 Server Address: SIP server address , support both IP address and domain
name.
 Server Port: SIP server port , default is 5060.

Account Name ： SIP account name.

Phone Number ： SIP account phone number, if leave it as blank , no registration
information will be sent out.

Display Name ： Show the display name that you want to display on the phone of
callee. Support number and letter input.

Proxy Server Address ： Normally the Proxy server is the same as SIP server. If
they are different then fill in the correct information that provided by ISP.

Proxy Server Port: Set your SIP server port.

Proxy Username: Input your SIP register account name.