User manual

AT-640P User Manual
ATCOM TECHNOLOGY CO. , LIMITED
C 、 when you use PPPoE to get IP address ， please select “ PPPoE ” ， and input ADSL
account information as below picture ：
Parameters ：
PPPoE Server: sever name, if the ITSP have no special requirements, please keep
"ANY" as default.
Username: ADSL account username.
Password: ADSL account password.
Attention ：
1 ） After configuration setting please click “ Apply ” to apply changes.
2 ） If the IP address is changed after effecting the configuration change , the
webpage will lose response former address, so you must get to the webpage with
new address.
3 ） If the LAN IP address is happened to be the same as WAN IP which is allocated
from DHCP server. The LAN IP address will be changed automatically by adding 1 at
the last digital.
2.2.
2.2.
2.2.
2.2. LAN
LAN
LAN
LAN Config
Config
Config
Config
Parameter
Parameter
Parameter
Parameter ：

LAN IP ： config LAN static IP.